Filter by
Type part
more... less
Type
Price
Filter

San Remo Venezia

San Remo Venezia espresso machine parts

The espresso machine on this product page is the Sanremo Venezia.  This San remo espresso machine has a simple but elegant design. 

This San Remo espresso machine is build in various configurations ranging from a single group all the way up to a 3 group espresso machine. All these configurations are available in a 120V and in a 230V. Even the 3 group espresso machine is powered on 120V. This espresso machine is only available with a volumetric dosing system. So that you are able to select various coffee types based on the pre-set volumetric settings.

This model of San Remo espresso machine isn’t equipped with the E61 style of solenoid valve brewing group. But it is equipped with the solenoid valve universal ring brewing group.

San Remo Venezia espresso machine parts

Cafelat red silicone portafilter gasket 73x57x8mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded red silicone....
€4.36

Gicar level regulator NRL30/1E/2C/F 115V

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.70G. Note: this is the 115V version and not the 230V version This Gicar level regulator has the name NRL30/1E-2C/F and runs on 115Vac. You can find this level regulator on various espresso machines such as the...
€73.71

Steam water valve shaft gasket holder

The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
€7.74

Tap joint o ring 16x2mm EPDM

The o ring on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and La Spaziale. The part reference for Spaziale is 08289 and for Nuova Simonelli and Victoria Arduino it is 02280037. This o ring is made from EPDM. The cord diameter is 2mm and the inner diameter is 16mm. This o ring has been made in...
€1.10

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10

Rubber shock absorber 15x15 M4

A rubber shock absorber prevents a rattling noise on your espresso machine. The damper on this page is ideal to put underneath your espresso machine pump motor. This specific model of motor support absorber can be used on Astoria and Wega espresso machines. You can use them offcourse on any espresso machine motor you want. The corresponding part number...
€3.41

Gicar flowmeter 1/4D 1,15 connector with led

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...
€55.65

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87

E61 style groups shower without welding 60mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€4.02

Shower screen 51,5mm

The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra. The external diameter of this shower screen is 51,5mm...
€5.46

Steam pipe spring 12x16,5mm

The compression spring on this product page can be found with a variety of espresso machine brands. It is used for applications in the steam and water valve with brands such as Victoria Arduino, Nuova Simonelli, la Spazaiale, Elektra and San Remo. The Spaziale part reference is 07568, The San Remo reference is 10402043, For Carimali it is 13.00059 and...
€2.24