This shop uses cookies and other technologies so that we can improve your experience on our sites. Click here to learn more close

Filter by

Price

0 277

Manufacturers

Type part

more... less

Brand

more... less

Type

more... less
Filter

Brewing group parts 

Brewing group parts 

There are 41 products.

Espresso machine brewing groups can be have quite complex mechanisms, if you look at the mechanisms used on the E61 brewing groups. These brewing groups have various springs and valve components, these can also change per brand. So they are not always interchangeable. The easiest coffee machine brewing groups are the solenoid operated ones, these have the least components seen it is electrically operated.

On this category page you will find items such as group collectors, lever mechanisms, portafilter clamping rings, drain valves, infusion valves, upper sleeves. These items are used on a variety of brands such as Astoria, Faema, Casadio, La Cimbali, Wega, Rancilio and San Remo.

per page
  • 37,71 € Add to cart In Stock

    The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....

  • 7,40 € Add to cart In Stock

    On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups. Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines. If you are not entirely sure if this...

  • 2,94 € Add to cart In Stock

    On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

  • 1,05 € Add to cart In Stock

    This model small brass square pin can be found in the oldest E61 brewing groups, the ones used on the Faema E61. This specific model can only be used on Faema E61 models and the ones used on Wega espresso machines. The Faema part reference for this item is 4161135915 and for Wega the part references are W10341 and WY27421013. This brass square...

  • 5,33 € Add to cart In Stock

    The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega. This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...

  • 0,82 € Add to cart In Stock

    This model small brass square pin can be found in the oldest E61 brewing groups, the ones used on the Faema E61. This specific model can only be used on Faema E61 models and the ones used on Wega espresso machines. The Faema part reference for this item is 4161135916 and for Wega the part reference is W10349  This brass square pin has been...

  • 10,51 € Add to cart In Stock

    The micro control lever shown on this page can be used to turn on or off the brewing sequence on the Faema E61 and Faema E61 legend espresso machine. The part reference for this item is 2819136651. This lever controller has been made from casted aluminium. The roller has been made from brass and has been riveted into place. This item is made in Italy.

  • 21,07 € Add to cart In Stock

    The cam holder on this product page is a OEM/Original Faema spare part, no not a NOS. but a modern one. The Faema part reference for this spare part is 4152135911 This spare part has been made from machined brass. But that’s not the final step. After that it has been polished, nickel plated and finally chrome plated. This item has been made in...

  • 2,05 € Add to cart In Stock

    The item on this product page is called a flow restrictor. This item can be installed on the Faema E61 espresso machine as well on the E61 style of brewing groups used by Futuremat. This flow restrictor is made from brass. the hole in the middle of this restrictor has a diameter of 2mm.

  • 1,99 € Add to cart In Stock

    The drain valve disc on this product page is only used in a few E61 style of brewing groups. You can find them with espresso machine brands such asLa Scala, Bezzera, ECM Heidelberg, La Pavoni, Rocket, Grimac and Isomac. This brass disc can be found at the bottom of the drain of various e61 groups. The brass disc has a outer diameter of 15mm and 8mm. the...

  • 3,80 € Add to cart In Stock

    This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...

  • 1,64 € Add to cart In Stock

    The o ring on this product page can be used on a variety of espresso machine brands and in various applications. You can find this o ring on brands such as ECM Heidelberg, La Scala, Bezzera, Cimbali, Grimac, La Spaziale, Brasilia and Gaggia. With applications such as water and steam valves and on brewing groups. The part references codes can be found in...

  • 18,72 € Add to cart In Stock

    The item on this product page is only used in some San Remo brewing groups. This item is a brewing group extension fitting. This product is a OEM/Original San Remo part. The part reference number for this item is 14852032A This extension has been made from chrome plated brass. The hole is 6mm. The group side is a 1/8” male fitting, the inlet side...

  • 1,10 € Add to cart In Stock

    The screw on this page is used to keep the shower screen attached on various Gaggia espresso machines. The Gaggia part reference for this item is WGADI0964-5X8I. This screw is a slotted stainless-steel screw, with a male M5 thread which has a length of 8mm. This screw has been made according to UNI 6110 - DIN 964 - ISO 2010. You can use this screw on...

  • 24,60 € Add to cart In Stock

    This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...

  • 10,60 € Add to cart In Stock

    On this page you will find a stainless steel plug. This OEM/Original part is made by the Cimbali group. This item can be used on various applications such as in a brewing group and water inlet valve. The part number for Casadio is 457347010 and for Cimbali it is 457347000. This plug is made from stainless steel and has a 3/8” BSP-G thread. The...

  • 78,60 € Add to cart In Stock

    The chrome plated clamping ring on this page is a OEM/Original Nuova Simonelli and Victoria Arduino spare part. This OEM part has the Nuova Simonelli part reference of 06200081 and the Victoria Arduino part reference of 06200081. This clamping ring for the portafilter has been made from casted brass which has been plated with nickel and chrome. This...

  • 8,60 € Add to cart In Stock

    The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...

Showing 1 - 18 of 41 items

Sign up for newsletter

Get exclusive deals you wont find anywhere else straight to your inbox!

Follow us