Filter by
Price
Coffee grinder part type
Type
Filter

Mazzer Kony electronic coffee grinder parts

The Mazzer Kony Elettronico is one of the work horses of the Mazzer brand. This coffee grinder can be used in any high volume bar or restaurant. The Mazzer Kony Electronic is a “on demand” coffee grinder, which means that the coffee you need will only be ground. So every espresso you make will be made from freshly ground beans.

This coffee grinder is made in various single phase types. The most common type is the 220/240V models. The other type is made for the US market, the 100/110V single phase models. The disadvantage of a single phase motor is that they do need to be powered with a capacitor. The size of capacitor mainly depends on the voltage type the motor is.

The Mazzer Kony coffee grinder is one of the models of Mazzer which uses conical grinding burrs instead of flat grinding burrs. These grinding burrs have 2 external and 2 internal sizes. The externals are 63 and 40mm, the internal sizes are 40 and 12mm. The distance between these burrs can be adjusted by turning the ring on the top clockwise and counter clockwise.

The ground coffee falls from the grinding section into the funnel section, under this funnel section you have the filterholder fork. On top of the funnel you have a touchpanel where you can select the type of coffees you want. You can set the amount of grinding seconds for a single or a double dose of ground coffee.

Mazzer Kony electronic coffee grinder parts

Mazzer Kony electronic

Mazzer Kony Robur reduction gear 28mm 17 teeth

The item on this product page is a OEM/Original Mazzer spare part. This item is a reduction gear. The Mazzer part reference for this item is S000SAT01, S000SAT01/AQQ and S000SAT01/QQQ. This reduction gear has a outer diameter of 28mm. This reduction gear has in total 17 teeth. The item has been made in Italy. This reduction gear can be used on the...
€28.29

Mazzer Kony Robur filterholder fork

The filter holder fork on this page is used on a variety of Mazzer coffee grinders. This portafilter fork is a OEM/Original Mazzer spare part. The part references for this item are S000FOB14 and S000FOB14/QQQ. This filter holder fork has been made from stainless steel. The length of this item is 73mm. The fork has been made in Italy. You can use...
€44.74

Mazzer Kony conical grinding blades single phase 63mm Original

On this product page you will find the OEM/Original conical grinding burrs for the Mazzer Kony. This is for the Mazzer Kony Electronic and the Mazzer Kony Doser. The part reference numbers can be found in the extra info tab. The outer burr has a external diameter of 63mm and a internal diameter of 40mm. The thickness of this burr is 23mm. This burr has 3...
€214.36

Mazzer motor rotation sticker

The sticker on this page basically says it all. It’s a Mazzer rotation sticker. The reason why they place this seen there are left and right turning motors. You do have also with a variety of brands where the motor spins the left way, like with Mazzer. But there are also brands which have a right turning motor. The blade design of the burrs for such...
€3.05

Mazzer Kony Robur reduction gear 100mm

The item on this product page is a reduction gear for various Mazzer coffee grinders. The Mazzer part references for this item are S000COR01 and S000COR01/QQQ. This reduction gear has a outer diameter of 100mm. The gear has been made in Italy. You can use this reduction gear on the Doser and the Electronic versions of various Mazzer models such as...
€59.34

Mazzer adjustment ring

On this page you will find the Mazzer burr adjustment ring. When you want a finer or coarser setting on your Mazzer burrs, you just need to turn this brass and threaded adjustment ring inward or outward. You can do this with the adjustment ring pin, with a m5 thread, which stick into the side of the burr adjustment ring(S00SPEA00) on various locations of...
€132.94

Mazzer sticker coarse - fine

This sticker is used on a variety of Mazzer coffee grinders. This sticker, which shows what the effects are of turning. If you turn the adjustment ring left is coarse and to the right this will be finer ground. So the space between the burrs to the left becomes bigger and to the right the distance between the burrs becomes smaller. This coarse fine...
€2.86

Mazzer kony complete coffee hopper original

The coffee hopper on this product page is a OEM/Original Mazzer spare part. This hopper is used on the Mazzer Kony. The Mazzer part references for this item are SKOSCAE03 and SKOSCAE03/QQQ This hopper is complete. It comes with the hopper, the lid, the shutter and the mounting mechanism to the coffee grinder. The Hopper has been made in Italy.
€91.89

Mazzer double timer electronic board 220-240V

The electrical part on this page is a OEM/Original Mazzer spare part. This item is used on various Mazzer coffee grinders. The Mazzer part references for this item are S000SCT06, S000SCT06/AQQ and S000SCT06-A. This timer board is suitable in the 220/240V application. The board itself is 100x74mm and has been made in Italy. You can only use this...
€152.49

Mazzer AER stop gasket

Every Mazzer coffee grinder has this item installed. The AER gasket. This gasket is located between the coffee doser and the body or between the funnel and the body. The item has the part numbers S000GUA01 or S000GUA01/QQQ  You can find this item on the doser models of the Mazzer coffee grinder models: Mini, Lux, Super Jolly, Major, Kony,...
€3.44

Mazzer coffee collecting tray

The coffee collecting tray on this page is used on a variety of Mazzer coffee grinders. This item is a OEM/Original Mazzer spare part. The Mazzer part references for this item are SMJ0PIB02 and SSJ0PIB02. This coffee collecting tray has been made from pressed stainless steel. The tray has been made in Italy. You can use this stainless-steel tray on the...
€68.31

Mazzer Kony Major cooling fan EBM 612NGH

The axial fan on this page is used on various Mazzer coffee grinders. The Mazzer part references for this item are S00SVEB01 and S00SVEB03. This axial fan is the EBM 612NGH. This fan is a 12Vdc 2,6W and runs at 5600rpdm. The outer dimensions are 60x60mm and the thickness is 25mm. This fan has been made in china. You can use this axial fan on the...
€60.49