Nozzle/jet
Nozzle/jet
There are 24 products.A nozzle/injector/gigleur is a small threaded part or a insert which is used to restrict the flow of water towards the brewing group of the espresso machine. A nozzle can be found in a variety of shapes and sizes, but they all have a small hole.
In most cases a nozzle is made from machined brass, but you will also find them from Stainless steel, for instance with Marzocco. And they are threaded into the brewing group. A good example are the E61 style of brewing groups, which have the nozzle in the top.
Most nozzles range from a diameter of 0,5mm all the way up to 1,0mm. This does depend on how much water you want to come true the brewing group.
La Cimbali group gigleur 0,8mm
(0) The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
Brewing group gigleur 0.6mm
(0) This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
La Cimbali copper gasket for gigleur...
(0) On this page you will find a copper gasket suitable for a variety of La Cimbali brewing groups. This gasket is mainly used to seal off the gigleur/nozzle underneath the brewing group. The La Cimbali part number for this gasket is 401234000. This gasket is a flat copper gasket. The gasket has a outer diameter of 14mm a inner diameter of 10mm and a...
Faema P4/P6/E64/E66 nozzle
(0) The nozzle on this product page can be used on a variety of Faema brewing groups. This nozzle has been made from a male M10 with a thread pitch of 1mm. The hole in the middle is 0,5mm. You can use this gigleur on the Faema Due, Faema E91, Faema E92, Faema E97, Faema E98, Faema Express, Faema E98 president and the Faema Smart.
La Cimbali gigleur 0.5mm
(0) The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
group gigleur M5x1 hole ø 0.7 mm
(0) The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....
San Marco gigleur
(0) The item on this product page is a OEM/Original La San Marco spare part. This item is a plug with a jet and filter. The San Marco part reference is 206300 and CCMMIN1440. This plug is used in various La San Marco espresso machines which use a hydraulic system. This item has been made in Italy.
Nozzle M5x1mm 0,75mm
(0) The nozzle/gigleur on this product page is used on various espresso machine brands such as Astoria, Bezzera, Brasilia, Wega and La Pavoni. The Astoria part references are 10300001 and 10300A. for Bezzera the part reference is 5223001, for Brasilia the references are 00046.0.00.04 and 0004600004, for La Pavoni are the references 310048 and 314008....
La Pavoni group reducer 2,5mm
(0) The item on this product page is a flow restrictor used in various La Pavoni brewing groups. The La Pavoni part reference number for this item is 314109. This small brass disc is placed in the back of the brewing group. In the middle of this disc is a small opening, in this case 2,5mm. You can use this disc on the brewing groups used on the La Pavoni...
VA/NS Gigleur M8x1mm dia 0,8mm
(0) The jet/gigleur on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare mart. The part reference for Nuova Simonelli is 07300125 and for Victoria Arduino it is 07300125. This jet has a male thread of M8 and a thread pitch of 1mm. The hole in the middle is 0,8mm. This item has been made in Italy. You can use this...
VA/NS flow restriction gigleur M8x1mm ø...
(0) The jet/gigleur on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare mart. The part reference for Nuova Simonelli is 07300229 and for Victoria Arduino it is 07300229. This jet has a male thread of M8 and a thread pitch of 1mm. The hole in the middle is 0,5mm. This item has been made in Italy. You can use this gigleur/jet on...
Nuova Simonelli Nozzle M8x8
(0) The nozzle on this product page is a OEM/Original Nuova Simonelli spare part. This gigleur is used on a variety of Nuova Simonelli espresso machine models. This nozzle has the Nuova Simonelli part reference number 07300225 The thread used on this jet/nozzle is a M8 thread with a length of 8mm. The central hole has a diameter of 3mm. This nozzle is...
Nuova Simonelli nozzle m8x8 ø 3.2mm
(0) The item on this product page is a Nozzle which can be used in various Nuova Simonelli espresso machines. This product is a OEM/original spare part and has the part reference number 07300684. This nozzle has a thread m8 with a length of 8mm. the central hole is 3,2mm. This item is made in Italy. You can use this nozzle on the Nuova Simonelli Musica,...
La San Marco gigleur 3 piece
(0) This item is a nozzle/gigleur used in various La San Marco espresso machine brewing groups. The La San Marco part references for this item are 400167 and BVASS1400. This nozzle is made from 3 individual components. These items are machines from brass. This item has been made in Italy. You can use this nozzle on the San Marco 85 and the San Marco 95.
Rancilio group gigleur M8x1 dia 0,5mm
(0) This espresso machine nozzle or gigleur is a OEM/Original spare part of Rancilio and made in Italy. You can find this jet on a variety of brewing groups made by Rancilio. The Rancilio part number for this nozzle is 10060612 This gigleur screws into the middle of the brewing group. The thread used is a M8 with a pitch of 1.00 mm (standard is 1.25mm)...
La Carimali nozzle m10x1mm 0,8mm
(0) The item on this page is a brewing group gigleur/nozzle. This nozzle is used on a variety of Carimali espresso machines. The Carimali part reference number for this item is 22.00772. This brass nozzle has on both sides a M10x1 male thread. The hole in the middle has a diameter of 0,8mm. This item has been made in Italy. This item can be used on the...
La Carimali nozzle 1/8"M-1/8"M 1.2mm
(0) The item on this page is a brewing group gigleur/nozzle. This nozzle is used on a variety of Carimali espresso machines. The Carimali part reference number for this item is 22.00806. This brass nozzle has on both sides a 1/8” male thread. The hole in the middle has a diameter of 1,2mm. This item has been made in Italy. This item can be used on the...
