Faema P4/P6/E64/E66 nozzle

Faema E61 glass plate srew Only sold in a set of 4

This thermostat can be found on various older domestic Vibiemme espresso machines. The VBM part reference number for this item is ELETTEDOMJU2B. This is a single phase thermostat TR/86 and is rated up to 16A at 250V. The capillary has a length of 380mm and the bulb has a diameter of 6mm and length of 70mm. Note: of this thermostat are 2 versions...

The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655. This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...

The item on this product page is a non return and expansion valve in one. This item is a La Carimali spare part. This item is a OEM/Original part with the Carimali part reference number 01.00473  This valve is on one side a non return valve and on the other side a expansion valve. The fittings used are both male fittings, one is a ¼”and...

The capacitor on this product page is made by the Italian company Ducati Energia. The Capacitor provides 25µF at 450V 50/60Hz. This specific model is a version with the cables attached to the capacitor. The length of this 1 pole cable is 150mm. The outer diameter is 40mm and the length is 92mm. The capacitor can operate at -25 degree C all the way up to...

This wire filter is used in a variety of Faema E61 brewing groups, such as the classical E61 but also the more modern E61 Jubilee and the E61 Legend. This filter has the Faema part reference number 4771135894 This filter is made from stainless steel. The outer diameter is 10,5mm and the thickness is 0,3mm. This item is made in Italy.

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...