×

SHOPPING FROM

Filter by

Categories

more... less

Price

0 90

Manufacturers

Type part

more... less

Voltage

more... less

Watt

more... less
Filter

Vibiemme (VBM) Domobar espresso machine parts

Vibiemme (VBM) Domobar espresso machine parts

There are 68 products.

The Vibiemme Domobar is one of the most well know espresso machine models around, with very good reviews over the time. This model, which originates from around the end of the 1970’s, of espresso machine is intended for domestic use. This model of VBM espresso machine has a lot features which you will also find on commercial espresso machines.

The Vibiemme Domobar espresso machine has been build in various types. You do recognize that they are Vibiemme espresso machines, but they do have various features installed on them you won’t find with other models.

The VBM Domobar has been build with features such as dual boilers, volumetric dosing, horizontal boiler, vertical boiler, water tank and so on. Below the categories we will discuss various versions of the VBM Domobar espresso machine.

per page
  • 0 1 2 3 4 (0)
    11,27 € Add to cart In Stock

    This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In...

  • 0 1 2 3 4 (0)
    43,37 € Add to cart In Stock

    The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....

  • 0 1 2 3 4 (0)
    3,32 € Add to cart In Stock

    The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this...

  • 0 1 2 3 4 (0)
    1,43 € Add to cart In Stock

    This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...

  • 0 1 2 3 4 (0)
    1,33 € Add to cart In Stock

    This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...

  • 0 1 2 3 4 (0)
    2,75 € Add to cart In Stock

    Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these...

  • 0 1 2 3 4 (0)
    1,04 € Add to cart In Stock

    This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

  • 0 1 2 3 4 (0)
    0,56 € Add to cart In Stock

    This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera,...

  • 0 1 2 3 4 (0)
    1,00 € Add to cart In Stock

    This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...

  • 0 1 2 3 4 (0)
    2,08 € Add to cart In Stock

    On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...

  • 0 1 2 3 4 (0)
    4,20 € Add to cart In Stock

    On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....

  • 0 1 2 3 4 (0)
    2,83 € Add to cart In Stock

    This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...

  • 0 1 2 3 4 (0)
    5,88 € Add to cart In Stock

    This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61,...

  • 0 1 2 3 4 (0)
    0,97 € Add to cart In Stock

    The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

  • 0 1 2 3 4 (0)
    3,31 € Add to cart In Stock

    This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme...

  • 0 1 2 3 4 (0)
    3,32 € Add to cart In Stock

    If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...

  • 0 1 2 3 4 (0)
    0,91 € Add to cart In Stock

    This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

  • 0 1 2 3 4 (0)
    13,34 € Add to cart In Stock

    This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

Showing 1 - 18 of 68 items

Models of the Vibiemme Domobar

In the text above was mentioned that there are various versions available of the Vibiemme Domobar, this does make sense seen there are over the time various new model versions introduced.

The Vibiemme Domobar

This version of the VBM Domobar is the oldest version. It can be easily identified with the fixed steam tube and the red electrical buttons on the front of the machine, which are integrated in the stainless steel front. In this stainless steel front you will find also the pump pressure gauge and the indicator lights

On this model of the Domobar you have a water tank on the back,  from this water tank the water is pumped, with the help of a Ulka vibration pump into the boiler. This boiler can be powered with a 110V or a 230V heating element, which produces approx. 1350W.

On the front of the espresso machine you will find the brewing group, this is one of the type of a E61 Style. This specific model is a manual operated brewing group. The mechanism on the side functions to operate the internal components and to activate the pump switch to activate the Ulka vibration pump.

The Vibiemme Domobar Junior

This version of the Vibiemme Domobar is called the Junior, this version comes in 2 configurations. One is the Heat Exchanger(HX) and the other one is the Dual boiler model. The 2 configurations will be discusses separately.

The Vibiemme Domobar junior HX is one of the versions available of the Vibiemme Domobar. This espresso machine has on the front a water and a steam valve. The valve sticks out of the stainless steel front, seen with the older one only the knob was visible. In this stainless steel front you will find also a pressure gauge for the boiler and for the pump. On the back of the VBM Domobar HX you will find a water tank, which makes it ideal if you don’t have a main water line available.

The boiler used on this espresso machine is based on a HX principle, the model is a vertical oriented one. With on the top parts such as the pressure switch, level probe, safety valve and a vacuum valve.

The Vibiemme Domobar Junior Dual boiler

This is the other version of the VBM Junior coffee machine, with the biggest difference is that this espresso machine has 2 individual boilers. One is for the brewing group and the other one is for the steam and water valve.  Both the boilers are fitted with a 600W heating element, this can be a 110V or 230V.  One of the heating elements is controlled with a pressure switch and the other one with a thermostat.

This version of the Junior is also fitted with a water tank on the back, where the Ulka vibration pump is used to pump the water into the boilers and towards the brewing group. On this model this is also a manual E61 style of brewing group. On the front stainless steel panel you find various switches, pressure gauges and the steam and water valve.  Below the brewing group you have the drip tray and drip grid. Don’t forget to regularly empty this.

The Vibiemme Domobar Super espresso machine is a bigger version of the Vibiemme Domobar espresso machine. The version is available in 4 versions. To say it simple a single boiler and a multi boiler system and a volumetric and a non volumetric version. These Domobar version have a variety of features

 

The Vibiemme Domobar Super Elletronica 2B

This version of the VBM Domobar is the volumetric version with 2 boilers, but that’s not all. The coffee boiler is powered with a 800W heating element and the steam boiler is powered by a heating element of 1200W. These heating elements are controlled for the steam/water boiler with a manual pressure switch and the coffee brew boiler is controlled with a thermal PID, which controls a relay.

Seen this is a volumetric version you will also find a flowmeter and a dosing device. On the front stainless steel panel you will find the push button panel for the coffee selection. As well as a pump pressure gauge and a boiler pressure gauge. But also the display of the thermal PID.

The brewing group used on this Domobar model is a e61 style of brewing group, but not a manual one this is a solenoid operated brewing group. Which is controlled by the touchpanel on top of the espresso machine.

The Vibiemme Domobar Super Elletronica HX

Other then the 2B (dual boiler) version of the VBM Domobar Super Elletronica is this the version with a Heat Exchanger (HX) boiler. in this boiler will find a single heating element which produces 1800W at 230V. Other features you will find on this boiler is a safety thermostat, various fittings, vacuum valve, safety valve and a level probe. The heating element is controlled with a mechanical pressure switch.

This is the “Elletronica” version which means that this is a volumetric versions of the Domobar Super. So that requires also some additional parts such as a dosing device, flowmeter and a touchpanel. This touchpanel can be found on the front of the machine, embedded in the stainless steel cover. In this cover you will also find other parts such as the pump pressure gauge and the boiler pressure gauge.

The brewing group, which is located on the front of the espresso machine, is fitted with a E61 Style of brewing group. Seen it is volumetric it is controlled with a solenoid valve, which is located underneath the brewing group. Which is covered with a small metal shield. This brewing group does use the same gaskets and portafilters as the manual brewing group of Vibiemme.

The next versions of the Vibiemme Domobar Super are the non volumetric ones, these versions are a little less complex then the volumetric ones described above. These are also 2 versions available of. This model is called the VBM Domobar Super Manuale

The VBM Domobar Super Manuale 2B

This version of the VBM Domobar is the manual version with a dual boiler, that is what the 2B indicates. For that reason there is a steam and water boiler and a separate coffee brewing boiler. The coffee boiler is powered with a 800W heating element and the steam and water boiler is fitted with a 1200W heating element. On the coffee boiler this heating element is controlled with a temperature sensor and on the steam/water boiler with a pressure switch.

On the front of the Super manuale you will find a small display where you can set the temperature for the coffee boiler. But you will also find a steam valve, water valve a pressure gauge for the pump and a manometer for the boiler.

At this location there is also the “manuale” brewing group installed, this is a e61 style of brewing group. But unlike with the “Elletronica” version this one is manually operated.

Vibiemme Domobar Digitale

The Latest addition to the Vibiemme Domobar line of espresso machines is the VBM Domobar Digitale. This espresso machine is fitted with a single coffee boiler, which does have a fitting for a steam valve. The boiler has a heating element installed of 1350W, which can be 110V or 230V. The control of the heating elements is done with a temperature sensor, when the thermal PID reads a too low temperature the element will go on when the temperature is reached then the element will turn off. This is done with the help of a Solid State Relay(SSR).

The control of the temperature of the boiler is done with the display and keyboard on the front of the espresso machine, this is integrated in the stainless steel front. Below the display you will find the E61 style of brewing group, this specific model of brewing group is based on the E61 brewing group but slightly different technically and aesthetically.

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

Cookie preferences

Functional cookies
No
Yes
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Cookie Provider Purpose Expiry
PHP_SESSIDbrooks-parts.comThe PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.Session
PrestaShop-#brooks-parts.comThis is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.480 hours
Advertising Cookies
No
Yes
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
No
Yes
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.
Performance cookies
No
Yes
These are used to improve the browsing experience and optimize the operation of the shop.
Other cookies
No
Yes
These are cookies without a clear purpose or those that we are still in the process of classifying.