On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a plastic outlet fitting. The disadvantage of this is that the threads wear out a lot faster then with the brass outlet.
To power the vibration pump there are on top of the vibration pump 2x 6,3x0,8mm 2 male spade connectors. The maximum water temperature for this vibration pump is 20°C with a maximum pressure of 15bar (this pump is not adjustable)
This vibration pump is used by a variety of espresso machine manufacturers like: Vibiemme, ECM, Astoria, Grimac, La Spaziale, La Pavoni, Victoria Arduino, Cimbali, Isomac and ECM
If you are not sure if the Ulka EX5 230V is suitable for your espresso machine. Don’t hesitate to contact us and we might be able to find the correct part for you
Looking for similar items or different specifications for this Ulka Vibration pump EX5 230V 50/60Hz with brass outlet?
Explore our full range in the Bezzera, Brasilia, Faema categories
*
This part is compatible to the original part number. Part numbers are always leading.
We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.
Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.
They are both operated with a Ma-ter pressure switch with is fitted with a safety valve and with a relay. The older ones had a build on relay, but the latest ones have a separate relay.
This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.
The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.
The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The pump on this product page is made by the Italian company Fluid o Tech. This specific model of pump can be used on various models of the espresso machine brand La Carimali. This model of pump is mainly used on the Full automatic espresso machine models of Carimali. The Fluid o tech part reference numbers for this pump are MB0054AGANN0000 and...
On this page you will find a fluid o tech rotation pump. This configuration is one of the most common ones with espresso machines, it is also called the “Standard” model. This “standard” model has a NSF and a WRAS approval, the part number for this part is PA0154AGANN0000 made in Italy
The specific pump has a flowrate of 150 L/H with a balanced bypass. If...
The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116.
This filter has...
On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...
To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection.
These type of couplings...
On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND.
The pump in question is a flange pump. This pump is attached the espresso machine motor with 2 bolts/screws. The pump...
The pump on this product page is made by the Italian company Ulka. This type of pump is called a vibration pump and doesn’t require a motor. This specific model is the EP5, the Ulka part reference number is 1.01.305.05/PA and the Ceme part refence numbers are 1.01.305.05/PA and 10130505PA.
This model of pump is the 120V 60Hz version of the EP5 and uses...
The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...
