The Ulka pump on this product page is the EX5GW model. This pump model is a small 220V pump used on various applications. The Ceme part number for this item is 101321GWPS6.
This Ulka pump runs on 220V 50/60Hz and uses 48W of power. The inlet side is made from plastic and has a diameter of 6mm and the outlet side is made from brass and has a female 1/8” BSP-G thread.
The maximum pressure of this pump is 15 bar with a maximum water temperature of 35 degree Celsius.. On the inside is a integrated diode installed, which is the 1N 4007P. This pump has been made in Italy.
The Ulka pump on this product page is the EX5GW model. This pump model is a small 220V pump used on various applications. The Ceme part number for this item is 101321GWPS6.
This Ulka pump runs on 220V 50/60Hz and uses 48W of power. The inlet side is made from plastic and has a diameter of 6mm and the outlet side is made from brass and has a female 1/8” BSP-G thread.
The maximum pressure of this pump is 15 bar with a maximum water temperature of 35 degree Celsius.. On the inside is a integrated diode installed, which is the 1N 4007P. This pump has been made in Italy.
Looking for similar items or different specifications for this Ulka vibration pump EX5GW 48W 220V?
Explore our full range in the Pump category
*
This part is compatible to the original part number. Part numbers are always leading.
Details
55-649-L-3331010
Data sheet
Country of manufacturing
Made in Italy
Pump brand
Ulka
Type
Compatible (non-original)
Type pump
Vibration pump
Voltage
220V
Review
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The part on this product page is a pump made by the Italian company Rotoflow Fluid o Tech. This model of espresso machine pump can be used on various espresso machine brands such as Astoria, Carimali, Dalla Corte, San Marco and Wega. The Wega part reference is WY4626303001, the Astoria part reference is 4626303001 and the Carimali part reference number is...
With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...
The item on this product page is a pump which can only be used on various Casadio, Cimbali and Faema espresso machines, seen this pump uses a specific type of small shaft. This pump has been made by the company Procon. The Procon part references for this item are SE1509BF and 132Y060F123A. The Casadio part reference is 533199110, the Cimbali part...
The item on this page is a espresso machine pump made by the Italian company Fluid o tech. This brass espresso machine pump can be used on various espresso machine brands such as Bezzera Nuova Simonelli, Rocket and La Spaziale. The Bezzera part reference for this item is 7730509, the Spaziale part reference is 02390, the Nuova Simonelli reference 01300004...
The pump on this product page is made by the Italian company Fluid o tech. this type of fluid o tech coffee machine pump can be used in various San Remo espresso machines. The San Remo part reference for this pump is 10252072C
This fluid o tech pump has a flowrate of 200 L/H and is equipped with a balanced by-pass. The fittings for the in and outlet for...
The part on this product page is a brass water filter. This filter is screwed into the espresso machine water pump. You can find this type of filter with various espresso machine brands such as Brasilia, Carimali, Casadio, Cimbali and Faema.
This brass water filter has a male in and outlet, these threads are 3/8” BSP-G. Inside this brass housing is...
The rotation pump on this page is from the bolt on type. The specific model is made by the pump manufacturer Procon and it is made in Ireland. The pump is NSF certified and has the Procon part number 132E060F114B150
This specific pump type has a slightly different flange then most Procon pumps used on espresso machines. This type is a bolt on flange, and...
