Vibiemme Domobar Junior HX boiler

The item on this product page is a level probe which can be used on a variety of Vibiemme espresso machines. The Vibiemme part refence number for this item is ELETSON. This level probe has a male ¼” fitting and a overall length of 140mm. This level probe has a 90 degree angle at the connector. This level probe can be used on a variety of Vibiemme espresso...

This contact thermostat has a shut off temperature at 165 °celcius. In this case it is a manual espresso machine thermostat. That means that it needs to be pushed manually to reset.  With a automatic one it will reset itself. On the bottom of this thermostat is a M4 male screw thread. You can screw the thermostat into a boiler for instance. For...

The item on this page is a OEM/Original VBM fitting. This fitting is used to install the later model of thermostat which goes inside the boiler. The Vibiemme part reference number for this fitting is PORTBULTERRID. This fitting is made up out of a male and a female side. The part which goes inside the boiler is a male M12 thread, where the internal thread...

This adjustable bypass is used in the Vibiemme Domobar and a variety of other versions of the Vibiemme Domobar Super. With the parts numbers: ASSBYPASSNEW and ASSBYPASS. This adjustable bypass connects to the internal Ulka vibrations pump. This bypass has a connection in of male 1/8” BSP and the outlet fitting is a 1/8” BSP Female. There is also a exhaust...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

The pressure switch on this product page is made by the Italian company Ma-Ter. This company produces a variety of pressure switches.  This pressure switch is mainly used on Vibiemme espresso machines. The Mater part reference number for this item is XP742C410015. The Vibiemme part reference number for this item is ELETPREDSUKIR  This pressure...

On this page you will find a heating element suitable for the Vibiemme Domobar Junior (part number: ELETRESD1625). This element has a brass flange and a copper element. The element itself has a wattage of 1600W with a voltage of 230V. The immersed length of the element is 95mm. The flange has a OD of 1” ¼” . The element connection has 2 poles, these 2...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...