Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Vibiemme Domobar Espresso Machine Models and Parts

The Vibiemme Domobar is one of the most well-known espresso machines, particularly favored for domestic use. First introduced around the late 1970s, the Domobar has seen various updates and versions over the years, maintaining its reputation for quality. This machine offers many features typically found in commercial models, making it a popular choice for home enthusiasts and small offices.

Vibiemme Domobar Espresso Machine Models & Parts | Brooks Parts

PTFE gasket 25.4x21.2x5.5mm

This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...
€5.03
Quick-view

bottom fitting for boiler pipe 1/2"m 1/2"m, hole 1/4"f

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....
€17.11
Quick-view

Lever switch 16A 250V

This classical style of on/off switch can be used with brands such as ECM Heidelberg and Vibiemme. The ECM Heidelberg part reference is C199900087 and the Vibiemme part reference is ELETINTLEVMET. This switch is a toggle switch which has been rated up to 16A at 250V. The hole diameter for this switch is 12mm. You can use this switch on the Vibiemme...
€15.25
Quick-view

E61 chromed group collector

The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
€65.82
Quick-view

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...
€5.90
Quick-view

Ulka vibration pump EX5 41W 120V with brass outlet

The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...
€42.33
Quick-view

Vibiemme 2 coffee portafilter original

The portafilter on this product page is a OEM/Original Vibiemme spare part. The Vibiemme part reference for this double portafilter is ASPORTN2TAMON. This portafilter has a closed double spout, this cover can be removed for cleaning. The ear orientation on this portafilter is 90 degree. The thickness of the ears is 5,5mm. This portafilter does come with a...
€90.16
Quick-view

Vibiemme portafilter 2 coffee

The portafilter on this product page is a 2 coffee portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has a double spout. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless steel...
€52.36
Quick-view

E61 cam lock stainless steel m6

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...
€6.63
Quick-view

Vibiemme single coffee portafilter original

The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...
€90.16
Quick-view

Vibiemme upper sleeve

This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
€42.94
Quick-view

Bush pipe ball

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€5.04
Quick-view

Wera shower screen screwdriver philips

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€12.87
Quick-view

Vibiemme portafilter 1 coffee

The portafilter on this product page is a 1 coffee portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has a single open spout. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless...
€54.53
Quick-view

Vibiemme steam/water valve knob

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...
€9.73
Quick-view

Vibiemme(VBM) fitting 1/8” x M10

This fitting is used on a variety of of the Vibiemme Domobar models on top of the boiler. This specific item is a OEM/original VBM spare part and has the part reference RACCDOM18. This brass fitting has on one side a Metric M10 thread, which screws into the boiler and on the other side a 1.8” thread. This side is flared, so you can only connect tubing...
€7.45
Quick-view

Vibiemme Domobar fitting 1/4F - M12 M

The item on this page is a OEM/Original VBM fitting. This fitting is used to install the later model of thermostat which goes inside the boiler. The Vibiemme part reference number for this fitting is PORTBULTERRID. This fitting is made up out of a male and a female side. The part which goes inside the boiler is a male M12 thread, where the internal thread...
€8.94
Quick-view

Vibiemme Domobar lever microswitch 16A 250V

The microswitch on this product page is used on various espresso machine brands such as Vibiemme and La Pavoni. The La Pavoni part reference number is 435080 and the Vibiemme part reference number is ELETMICP1. This microswitch is used as part of the brewing group. When this switch is turned on the pump starts running. This microswitch has a longer lever...
€20.88
Quick-view

Spring for steam valve 10.8x30 mm

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel compression spring...
€4.09
Quick-view

Vibiemme chromed lever sleeve

The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated...
€60.39
Quick-view

Vibiemme water pipe

On this page you will find a complete water pipe for a Vibiemme espresso machine. Models which use this type of are the Vibiemme Domobar Junior and the Vibiemme domobar Super. This water pipe exists out of 3 components. The water tube itself, the water pipe nozzle and the connecting nut to the valve. The inserts for the water pipe nozzle are generic...
€23.62
Quick-view

Vibiemme Domobar steam valve

On this page a steam valve is shown which is suitable for the Vibiemme Domobar espresso machine. The Vibiemme part reference for this item is RACCRUBSC. This valve is a complete steam valve and ready to install. The fittings on both sides are a male ¼”BSP-G thread. This valve has been manufactured in Italy. Note: this Domobar steam valve does not come...
€48.15
Quick-view

Vibiemme Domobar

The original Vibiemme Domobar is easily recognizable by its fixed steam tube and red electrical buttons integrated into the stainless steel front panel. The machine is powered by a Ulka vibration pump, with a water tank at the back that supplies water to the boiler. Available in both 115V and 230V versions, it produces around 1350W of power. The manual E61-style brewing group operates the internal components via a side lever, which controls the pump.

Vibiemme Domobar Junior

The Vibiemme Domobar Junior comes in two configurations: Heat Exchanger (HX) and Dual Boiler.

  • Vibiemme Domobar Junior HX: The HX version features a vertical boiler and uses an Ulka vibration pump with a water tank on the back. It includes water and steam valves, a pressure gauge, and both a safety valve and vacuum valve for pressure management. This version is perfect for those who need both espresso brewing and steam capabilities from the same boiler.

  • Vibiemme Domobar Junior Dual Boiler: This version comes with two independent boilers—one for brewing and one for steam. Each boiler is equipped with 600W heating elements, controlled by a pressure switch and thermostat. It also includes the E61 manual brewing group and a water tank located at the back.

Vibiemme Domobar Super Models

The Vibiemme Domobar Super is a more advanced version, available in both volumetric and non-volumetric setups. It features dual boilers and is designed for more complex brewing tasks.

  • Vibiemme Domobar Super Elletronica 2B: The volumetric version with dual boilers, offering a PID-controlled coffee boiler and a manual pressure switch for the steam boiler. This model includes a flowmeter, dosing device, and touch panel for precise coffee control. The solenoid-operated E61 brewing group allows for automated brewing with consistent shots.

  • Vibiemme Domobar Super Elletronica HX: Similar to the 2B but with a Heat Exchanger (HX), this version is designed for high-volume use with a 1800W heating element and a PID controller. It also includes pressure gauges, a vacuum valve, and a touch panel for easy management.

Vibiemme Domobar Super Manuale

The Super Manuale versions are non-volumetric and provide more manual control over the brewing process. The 2B model has dual boilers and manual operation, with temperature sensors and a pressure switch controlling the heating elements.

Vibiemme Domobar Digitale

The Vibiemme Domobar Digitale is the latest model in the line, featuring a single boiler with a 1350W heating element. The PID system controls the temperature with a Solid State Relay (SSR) for precise heating. This model also uses an E61-style brewing group, but with some technical and aesthetic adjustments to improve performance.