Bush pipe ball
search
  • Bush pipe ball
  • Bush pipe ball
  • Bush pipe ball

Bush pipe ball


€3.32

€3.32 tax excl.

qty

  GDPR Compliance

Protecting your personal data

  Shipping policy

Everything about shipping your order

  Return policy

all the inns and outs about our return policy

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work?

Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is also place for a spring. This spring also gives some stiffness to the steam and water wand. Because there is a spring, the steam wand will stay in a fixed place once it has been moved. If there is no spring it will fall back to the lowest point.

To seal steam wand to the valve the coupling of the stainless ball(that’s on the end of the steam wand) and the brass steam pipe bushing is not enough. So between these surfaces there is also a o ring present.

This specific brass steam pipe bushing is quite common with a lot of models made by Vibiemme. But you will also see it with brands like La Scala, Grimac and ECM.

If you are not sure if this brass steam pipe bushing is also suitable for your espresso machine, just send us a message and we might be able to help you.

24-256-8V1418
8 Items

Data sheet

Brand
ECM Heidelberg
Grimac
La Scala
Vibiemme
Country of manufacturing
Made in Italy
Grimac
G11
La Scala
Butterfly
Carmen
Eroica
Iris
Tosca
part number
ECM heidelberg P6003.14
Fiorenzato A2200004
Grimac A2200004
Scala C-0175
Vibiemme RACCBULASF
Type part
Valve bushing
Vibiemme
Chimaera
Cubo
Domobar
Domobar Junior
Domobar Super
Dosaplus
Evolution
Kometa
Lollo
Mercury
Minimax
Replica
Revolution
Silver

We would not advice to do so, seen the capacity is too little to proper function in a bar or a restaurant. For a small office this espresso machine would be a good solution, as well as the use in a kitchen.

Well this does depend on how old your Bezzera BZ10 is. Seen you have 2 model versions. There is a pre- 26-06-2010 and a post 27-05-2010 version. The older type is in it’s original configuration isn’t available anymore, for this is a relay rebuild kit available which is the same as the new model.

They are both operated with a Ma-ter pressure switch with is fitted with a safety valve and with a relay. The older ones had a build on relay, but the latest ones have a separate relay.


This model of Bezzera espresso machine is fitted with a solenoid operated Bezzera ring brewing group, so it hasn’t been fitted with a E61 style of brewing group.

The Bezzera BZ10 espresso machine is fitted with a water tank, from this tank the water is pumped, with a Ulka vibration pump, towards the brewing group and into the boiler. So you won’t be able to fit a main water connection to this espresso machine.

The Bezzera BZ10 has been fitted with a double scale pressure gauge, or manometer. So you will see 2 needles, one is for the pump pressure and the other is for the boiler pressure. The boiler pressure goes from 0 up to 3 bar and the pump pressure goes from 0 up to 16 bar.

Comments (0)
No customer reviews for the moment.

8 other product