Filter by
Categories
Price
€ €
Filter

Vibiemme Part Category

On this category page you will find a wide selection of spare parts for Vibiemme espresso machines. This does include domestic and commercial espresso machines.

The espresso machines of VBM have a variety of steam/water valves, brewing groups, water inlet valves, electronics and heating elements.

Which is compatible with your espresso machine model depends on if it is a domestic espresso machine or a commercial. Seen the parts are different on a VBM Domobar then on a VBM Replica espresso machine.

You will find spare parts for VBM models such as the Vibiemme Cubo, Vibiemme Replica, Vibiemme Domobar Super, Vibiemme Chimaera, Vibiemme Silver, Vibiemme Evolution and the Vibiemme Lollo.

Vibiemme (VBM) espresso machine parts - part category
Heating element gasket PTFE 57x43x3mm Heating element gasket PTFE 57x43x3mm

Heating element gasket PTFE 57x43x3mm

On this page you will find a PTFE heating element gasket is suitable for a variety of brands such as Victoria Arduino, Grimac, Astoria, Faema and San Remo. This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This size of gasket is suitable for a 1”1/4 screw in heating element.
€2.71
compare
Quick-view
PTFE gasket 26x21x2mm

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.10
compare
Quick-view
Anti vacuum valve 1/4" stainless steel Anti vacuum valve 1/4" stainless steel

Anti vacuum valve 1/4" stainless steel

The anti-vacuum valve on this page can be used on various espresso machine models of the brand San Remo. The anti vacuum valve has the San Remo part reference of 10652040A  This anti vacuum valve has been made from stainless steel. The thread used is a male ¼” BSP-G thread. This stainless steel anti vacuum valve has been made in Italy...
€9.46
compare
Quick-view
O ring gasket 6x1.2mm O ring 6x1.2mm epdm

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10
compare
Quick-view
Water stem complete Water stem complete

Water stem complete

The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia. This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy. This water stem...
€10.30
compare
Quick-view
Vibiemme heating element 3500W 220V Vibiemme heating element 3500W 220V

Vibiemme heating element 3500W 220V

The element on this product page is suitable for Vibiemme 2 group espresso machines (ELETRESMI3522). This specific model is suitable for the Vibiemme Replica and the Vibiemme Chimaera. The element can generate 3500W with 220V on 50/60Hz. The element has 4 poles, with a thread and bolt connection. The element has a copper heating element with a brass...
€67.87
compare
Quick-view
Filterbasket 1 cup 7gr 70x27mm Filterbasket 1 cup 7gr 70x27mm

Filterbasket 1 cup 7gr 70x27mm

This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is MA1T108. This filterbasket can be used on a variety of espresso machines. This ranges from Brasilia, ECM Conti, Elektra, Kees Van Der Westen, Marzocco to Rocket, Slayer, Vibiemme, Nuova Simonelli and Victoria Arduino....
€4.94
compare
Quick-view
Faema E61 steam valve pin Faema E61 steam valve pin

Faema E61 steam valve pin

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...
€2.15
compare
Quick-view
Valve rod washer 18x6.4x1.6mm Valve rod washer 18x6.4x1.6mm

Valve rod washer 18x6.4x1.6mm

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.53
compare
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.29
compare
Quick-view
Safety valve 3/8'' 1,8 bar Safety valve 3/8'' 1,8 bar

Safety valve 3/8'' 1,8 bar

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
€12.18
compare
Quick-view
Drain valve chrome plated

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...
€5.90
compare
Quick-view