This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
This brass valve fitting is one of the most used components for steam and water valves. You will find this item on a variety of brands such as Faema, Marzocco, La Scala, La Pavoni and Vibiemme. This brass fitting has in total 3 screw threads. 1 for fixing it to the valve body, 1 for fixing the valve to the machine and the other one for the valve knob....
The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia. This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy. This water stem...
The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from...
The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
the item on this product page is a stainless steel split pin. This pin can be used on various steam and water valves used on Marzocco, Carimali, San Remo, Faema and La Scala espresso machines. The Carimali part reference number is 94.00092, the Faema part reference number is 4061024965, the Marzocco number is L165/8 and the San Remo part reference number...
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...
The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082 This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...
The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab. This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm....
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
After a while you do need to replace your steam nozzle, this can be because of various reasons. This specific model is made from brass and then chrome plated. The interior thread, which threads onto the wand, is a 1/8”BSP-G. The steam nozzle has 4 holes each of 1,5mm in diameter. To make it easier to clean this steam tip, they have made a flat...
This steam and water valve is one of the most common models found on commercial espresso machines. They can be found on brands such as San Remo, La Scala, ECM and Brasilia espresso machines. This steam and water valve has on the inlet side a conical shape, so for flared tubing. This valve has been manufactured in Italy. You can find this steam and water...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |