Basics on Espresso machine heating elements 
Espresso machine safety valves 
What kind of knock boxes are available? 
Faema E61 espresso machine Fiorenzato F5 GM GT
Fiorenzato F5 GM GT
There are 18 products.Fiorenzato F5 GM GT coffee grinder parts
The coffee grinder on this page is made by the Italian company Fiorenzato M.C. This grinder is the Fiorenzato F5 GM GT, a doser coffee grinder, which is ideal for commercial applications. This coffee grinder can also be used in a domestic situation, but it would be a bit too much.
This coffee grinder is equipped with a doser on the front of the coffee grinder. This doser can hold a certain amount of pre-ground coffee, when you need coffee it is always ready. The disadvantage of this is that the coffee used is not so fresh as with a doserless coffee grinder.
The Fiorenzato F5 GM GT has a version which runs on single phase 230V as well as single phase 110V.This coffee grinder does require a start capacitor to start the motor of the coffee grinder.
The grinding burrs used on this coffee grinder is a flat type with a right turning direction. The external diameter is 64mm, the internal diameter is 37mm and the thickness is 8,5mm. there are 3 fixing holes for this burr set.
Fiorenzato M.C. burrs spring
The grinding burr locking spring is a OEM/Original Fiorenzato coffee grinder spare part. The Fiorenzato part references for this item are 001.002.011 and 700000001. These compression springs are used in combination with the grinding burrs. These compression spring has been made in Italy. You can use these compression springs on basically every...
Fiorenzato M.C. rubber feet per set of 4
The item on this page is a machine foot which can be used on almost every Fiorenzato coffee grinder. The Fiorenzato part references for this item are 001.004.008 and 200000035. This machine foot has been made from rubber. The outer diameter is 19mm and the height is 13mm. This item has been made in Italy. You can use this machine foot on the...
Fiorenzato M.C. adjustment pin
The item on this page is a Fiorenzato OEM/Original spare part. With this adjustment pin you can change your grind settings. The Fiorenzato part reference for this item is 001.003.052 and 400000011. The adjustment pin has been made from stainless steel. The pin has a diameter of 7mm and a length of 50mm. The thread used is a M5. This item has been...
Fiorenzato M.C. star locking spring
The item on this page is a OEM/Original Fiorenzato spare part. This specific item is a doser start locking spring, which has been made in Italy. The Fiorenzato part reference numbers for this spring are 001.003.032 and 700000003. This compression spring can be used in various Fiorenzato models such as the Fiorenzato F4A, Fiorenzato F5, Fiorenzato F5...
Fiorenzato M.C. spring for pin
The item on this page is a OEM/Original Fiorenzato spare part. This compression spring is used in the coffee doser, which has been made in Italy. The Fiorenzato part reference numbers for this spring are 001.003.024 and 700000002. This compression spring can be used in various Fiorenzato models such as the Fiorenzato F4A, Fiorenzato F5, Fiorenzato...
Fiorenzato M.C. doser lever return spring
The item on this product page is a doser lever return spring, when you have pulled the doser handle this spring makes sure it will get back to its original position. This item is a OEM/original Fiorenzato spare part and can be used on various Fiorenzato doser coffee grinders. The Fiorenzato part references for this item are 001.003.048 and 700000004....
Ducati Energia capacitor 12,5µF 450V
The capacitor on this page is a 12,5µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1764. This capacitor is used as a start capacitor for the coffee grinder motor. This capacitor can be found with brands such as Cimbali, Faema, Bezzera, Nuova Simonelli, Mazzer, Brasilia,...
Fiorenzato coffee collector
The coffee collection tray on this product page is a OEM/Original Fiorenzato spare part. This item has the part reference of 300000021. This tray for ground coffee has been made from pressed stainless still with a shiny finish. This item has been made in Italy. You can use this collection tray on a wide selection of Fiorenzato coffee grinders such as...
Fiorenzato F5 grinding burrs 64mm original
The grinding burrs on this product page are OEM/Original Fiorenzato spare parts. The Fiorenzato part reference number for these grinding burrs is 400000005. These grinding burrs are from the flat type and have a right turning direction. The external diameter is 64mm, the internal diameter is 37mm and the thickness is 8,5mm. There are in total 3 mounting...
Fiorenzato M.C. coffee hopper shutter
When you want to remove your hopper from your coffee grinder, but it is still full with coffee beans. You normally can close the bottom from the hopper off. This is what this item does do. This item is a OEM/Original Fiorenzato spare part. The Fiorenzato part reference for this item is 001.001.003 and 200000003. This plastic closing sheet has been...
Fiorenzato M.C. doser microswitch complete
The item on this product page is a microswitch used in the coffee doser in various Fiorenzato coffee grinders. The Fiorenzato part reference numbers for this item are 001.003.051, 001.009.001, 900000042 and 900000042/R. This OEM/Original Fiorenzato spare part has a external ring which has a diameter of 126mm. The length of the cables is 450mm. This...
Fiorenzato M.C. filterholder fork
The item on this product page is a OEM/Original Fiorenzato part. This item is a portafilter fork holder. This item has been made in Italy. The Fiorenzato part reference numbers are 001.004.018 and 900000025. You can use this portafilter fork on various Fiorenzato doser coffee grinders such as the Fiorenzato F4, Fiorenzato F5A, Fiorenzato F6, Fiorenzato...
Fiorenzato M.C. doser counter
The item on this page is a OEM/Original Fiorenzato spare part. this item is a grinder doser counter, which has been made in Italy. The Fiorenzato part reference number for this doser counter is 200000039 This compression spring can be used in various Fiorenzato models such as the Fiorenzato F4A, Fiorenzato F5, Fiorenzato F5 Ghiera, Fiorenzato F6,...
Fiorenzato M.C. siemens contactor...
The item on this product page is a Siemens contactor. This contactor can be used on various coffee grinders made by Fiorenzato. The Fiorenzato part reference number for this contactor is 600000018, the Siemens part reference number is SIE3TG10101AL2. This Siemens contactor is called the 3TG1010-1AL2. This contactor is rated up to 8,4A at 400V 4Kq. The...
Fiorenzato M.C. lever for doser
The item on this product page is a OEM/Original Fiorenzato coffee grinder spare part. this item is a coffee doser lever. The Fiorenzato part reference numbers for this item are 001.003.047, 900.000.036, 900000036, 900000125 and 900000622. This doser lever has been made from casted aluminium. This specific model is for the right-hand side of the...
Fiorenzato M.C. doser coffee tamper 57mm
The item on this product page is a bolt on coffee tamper which is used on various Fiorenzato coffee grinders. This item is a OEM/Original spare part. The Fiorenzato part reference number for this item is 001.003.039 and 200000017. This coffee tamper is attached to the doser on the front of the doser. The diameter of this tamper is 57mm. This item has...
Fiorenzato M.C. doser coffee tamper 55mm
The item on this product page is a bolt on coffee tamper which is used on various Fiorenzato coffee grinders. This item is a OEM/Original spare part. The Fiorenzato part reference number for this item is 001.003.013 and 200000023 . This coffee tamper is attached to the doser on the front of the doser. The diameter of this tamper is 55mm....
Fiorenzato M.C. doser cylinder
The item on this product page is a OEM/Original Fiorenzato doser cylinder. Through this clear plastic tube you can se the coffee doser on the inside., this item has been made in Italy. The Fiorenzato part reference numbers for this item are 001.003.009 and 200000036. This doser cylinder can be used on the Fiorenzato F4, Fiorenzato F5, Fiorenzato F6,...
Follow us