La Scala Espresso Machines: Crafting Authentic Italian Espresso
This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.74
Portafilter gasket 73x57x9mm
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)
The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€4.17
Filterholder gasket 72.5x57x8 mm
The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines.
This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...
€3.67
Faema E61 valve gasket 13x4x4mm
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
€0.74
Filterholder suplement gasket 73x59x0.8mm
The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups.
What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm.
What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.65
O ring gasket 6.07x1.78mm Solenoid valve
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal diameter...
€0.61
Portafilter gasket 73X57X8.5mm
This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac.
Of this...
€4.19
O ring gasket FKM 10.78x2.62mm
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€1.05
Silicone gasket 12.3x5.6mm
This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab.
This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm. There...
€1.08
E61 shower screen old style 60mm
This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm
Note: this is not a specialty coffee shower, but IMS also produces normal showers.
This is, unlike other 60mm models, a...
€4.29
Portafilter gasket 73x57x9mm red silicone
The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone.
You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala.
This red silicone gasket has a outer diameter...
€5.67
Blind filter stainless steel
The item on this page is one of the most important items of a espresso machine. The blind filter is a filter basket without holes and is used in combination with cleaning powder like Puly Caff to clean the inside of the brewing group with back flushing.
This model of blind filter is compatible with most espresso machines, there a couple of brands where it...
€3.32
Portafilter gasket 73x57x8mm
The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227
This portafilter gasket has been made from NBR with shore 75. This portafilter...
€3.95
Anti vacuum valve TV 1/4"
This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on.
This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of stainless steel. The...
€9.60
o ring gasket 7,2X1,9mm nbr
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore.
With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
€0.56
Tap joint gasket 14.5x7.5x6 mm
On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010.
This PTFE gasket, it is not white as you would expect with PTFE, has a outer...
€1.27
PTFE gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.38
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.47
Ffilterbasket 2 coffee 14gr 70x24,5mm
The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition filterbasket....
€5.69
Filterbasket spring 1,2mm 3 sides straight
To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. You can use spring on brands such as Casadio, Carimali, San Remo, Bezzera, Cimbali, Astoria, Spaziale
This spring is made from stainless steel. The cord diameter is 1,2mm....
€1.03
Safety valve 3/8" 2.0 bar CE PED IV certified
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high.
This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0 bar, this...
€10.47
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€3.47
Gicar flowmeter 1/4D 1,15 connector with led
The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands.
This specific flowmeter does not come with a fixed wire,...
€48.87
Solenoid valve screw M4x10
The product on this page is a Allen head screw for attaching a solenoid valve to a other surface. This type is a M4x10mm. It is a stainless-steel bolt according to UNI 5931 - DIN 912 - ISO 4762
You will only need this type of Allen head screw to attach the flanged solenoid valves to a flat surface.
This type of Allen screw is used in a lot of espresso...
€0.79