La Scala Espresso Machines: Crafting Authentic Italian Espresso
On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm.
What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€6.37
Gasket 13x4x4mm FKM
The gasket on this product page can be used on various espresso machine brands such as Faema and Rancilio. It is used in brewing groups, water inlet valves and steam and water valves. The Faema part reference for this item is 2151136654 and for Rancilio the reference is 36302002.
This gasket is made from FKM. The outer diameter is 14mm, the inner...
€1.48
Safety valve 3/8" 1,8bar CE PED IV
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G
This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
€13.27
Drain valve assembly
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm.
This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€8.99
Brewing group gigleur 0.6mm
This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.58
Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV
This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
€57.98
Portafilter gasket 72,7x57x8mm orange silicone
The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone. You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema and La...
€5.65
Gasket PTFE 22x16x2mm
This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies.
The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...
€0.86
Steamtube anti scorch clip
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube.
This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with the...
€2.41
Heating element 1400W 230V
On this product page you will find a screw in heating element which is suitable for a variety of espresso machines such as Brasilia, La Scala and Vibiemme. The part references for Brasilia are 01911.2.00.08, for La Scala C-0520 and for Vibiemme ELETRESD1422
This heating element produces 1400W at 230V, with 2 connecting poles. The immersed length of this...
€46.48
Shower with net and rays caulked 60mm
The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen.
This...
€4.10
Crushable copper washer 1/4" 18x14x2mm
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio.
This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
€1.19
O ring 20.63x2.62mm viton
On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton.
The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...
€2.95
Cafelat blue silicone portafilter gasket 73x57x8,5mm
This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat.
This gasket is made from food graded blue silicone....
€4.88
Valve rod washer 18x6.4x1.6mm
The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040.
This flat washer is made from zinc plated steel, this is not a issue seen its not in...
€0.66
Faema E61 steam valve knob
The steam and water valve knob on this page is mainly famous as the knobs used on the classic Faema E61 espresso machines. But nowadays they are used in a variety of other brands as well. Like with Vibiemme, La Scala and Grimac. This type of knob can also be used on the modern Faema E61 legend and Jubilee espresso machines. For the part references check...
€18.50
IMS E61 style shower screen
This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€22.75
Flowmeter gasket o ring
It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters.
The cord diameter of this o ring is 1,78mm and the inner diameter...
€1.00
Faema E61 group infusion spring
On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.62
Lucifer solenoid 3 way base mounting 220/240V 50/60Hz
The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve. Parker has listed this part under 471012 and 471013
The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6
The valve in question is a 3 way solenoid valve with...
€98.45
Parker 3 way solenoid valve 220/230V
This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The...
€83.33
E61 style camme rod
This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut.
This...
€20.25
Locking group gasket
If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€5.04