Filter by
Type part
more... less
Type
Price
Filter

Bezzera Mitica

Our selection of Bezzera Mitica spare parts

The Bezzera Mitica espresso machine is a single domestic espresso machine. This espresso machine has 2 versions.

  • with tank. The water tank versions are the Bezzera Mitica S, this tank can hold approx. 4L of water and is equipped with a vibration pump
  • with main water inlet version is the Mitica R is equipped with a Volumetric pump

Both the espresso machine models have a 220/240V model and a 110V model. The heating elements used for the 220/240V is a 1250/1450W version. For the 110/120V uses a 1350V heating element. The water content of both espresso machine models is approx. 2 L of water.

This espresso machine does use the E61 Style of brewing group, but not all components in the brewing group are interchangeable. Note: the standard E61 style of portafilter DOES NOT FIT in this brewing group, it is a completely different model for this brewing group.

Bezzera Mitica espresso machine spare parts

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€11.97

Bezzera green indicator light 110/230V 25W

On this product page you will find a OEM/Original green indicator light. This item is a OEM Bezzera spare part. The Bezzera part reference for this item is 7633624 . This indicator light produces 25W and can run on 110 and 230V. The head has a diameter of 13,4mm and the mounting hole diameter needs to be 10mm. This indicator light has been made in...
€6.93
Brooks Parts | Olab solenoid valve 2 way 1/8” 230V Brooks Parts | Olab solenoid valve 2 way 1/8” 230V
  • New

Olab solenoid valve 2 way 1/8” 230V

This solenoid valve is made by the company Olab. This specific valve is a 2 way valve which is used to control the flow of water. This specific model can be used on a variety of Bezzera espresso machines. This valve is compatible with the Bezzera part reference numbers 7702322 and 7702322.01. This valve is Olab K08198-B-B This solenoid valve has on the...
€82.76
Brooks Parts | Bezzera wire mesh filter dia 8,5x5mm Original Brooks Parts | Bezzera wire mesh filter dia 8,5x5mm Original
  • New

Bezzera wire mesh filter dia 8,5x5mm Original

This wire filter is used in the water inlet system on various Bezzera espresso machines, primarily the domestic models.  This item is a OEM/original Bezzera spare part and has the part reference  5471019 This wire mesh is made from stainless steel 304. The outer diameter is 8,5mm and the thickness is 5mm. This filter is made in Italy. You can use this...
€1.79

ECM heidelberg indicator light green 230V

On this page you will find a light green indicator light used in a variety of espresso machines made by ECM Heidelberg. This light green indicator light has the ECM Heidelberg part reference of B7633618  This light green indicator light is a 230V model. The head of the light is 18mm. The hole needs to be 12mm. It is rated up to 120°C. This light...
€15.17

Wera shower screen screwdriver philips

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€11.50
Bezzera heat exchanger...
  • New

Bezzera heat exchanger original

This item is a heat exchanger (HX) which is installed vertically inside the boiler of the espresso machine. This specific HX is a OEM/original Bezzera spare part and has the part reference number 5329020DC-AL. This HX is made from a copper tube and a brass fitting which have been soldered together. The thread is a 1” male connection. Inside the brass...
€114.47

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.29

Asco (Sirai) pressure switch P302/6

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
€83.48

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.59

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€5.08