La Cimbali M23
On this page you will find a plastic straight fitting. This fitting is used as a boiler fitting with the La Cimbali group with Cimbali, Casadio and Faema espresso machines. Part number for the Faema part 532601000, the Cimbali one 532-601-000 and the one from Casadio 532601000.
The white plastic end fitting has a variable diameter from 12mm up to 16mm....
€14.75
Wera shower screen screwdriver slotted
In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.
But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...
€11.50
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.53
Faema/Casadio/Cimbali shower screen 60mm original
The shower screen on this page is used on the various brewing groups Faema has made, which are also used on various Casadio and Cimbali espresso machines. This shower screen is a OEM/original spare part of Gruppo Cimbali.
It can be used on a wide range of espresso machines from The Faema E61, up to the Faema President and Teorema. But also on the M23-UP...
€9.20
Faema P4/P6/E64/E66 nozzle
The nozzle on this product page can be used on a variety of Faema brewing groups.
This nozzle has been made from a male M10 with a thread pitch of 1mm. The hole in the middle is 0,5mm.
You can use this gigleur on the Faema Due, Faema E91, Faema E92, Faema E97, Faema E98, Faema Express, Faema E98 president and the Faema Smart.
€5.29
Faema 21mm M5x1 diffuser
This brewing group diffuser/nozzle is used on various Faema brewing groups. The Faema part reference for this item is 4161024761 and 4161133848.
This brass nozzle has a outer diameter of 21mm. the female thread used is a M5 with a pitch of 1mm. The item has been made in Italy.
You can use this brewing group diffuser on the Faema E91, Faema E92,...
€8.91
La Cimbali safety valve protector
On this page you will find a rubber like sleeve. This rubber like sleeve is a safety valve protection sleeve. This sleeve slides over a safety valve. When there is a over pressure and steam and water are coming out off the safety valve. This sleeve will catch it and with the side connection the water will flow to the drain. This item doesn’t come with the...
€21.89
Safety valve 3/8" 2.0 bar TW1 cert
The boiler valve on this page is a safety valve which can be used on various La Cimbali espresso machines. The Cimbali part reference is 532392600 / 532-392-600.
This valve has a male 3/8” BSP-G thread. The valve has been calibrated at 2,0 bar. This is not adjustable. When the valve opens the steam outlet flow is 43,3 kg/h. This Italian made...
€26.62
La Cimbali filterbasket 1 coffee 6gr
The filterbasket on this page is for 1 coffee dose. This item is used on La Cimbali espresso machines. The La Cimbali part reference for this item is 457232000 and 457-232-000. This filterbasket has been made by the Italian company IMS Filtri, the part reference is GC1T043.
This filterbasket holds about 6 grams of ground coffee. The outer diameter...
€4.37
Portafilter gasket 73x57x9mm red silicone
The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone.
You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala.
This red silicone gasket has a outer diameter...
€4.52
Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar
Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV
This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
€67.63
Faema rubber pump-motor connector 40 mm
To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection.
These type of couplings...
€4.16