Filter by
Price
Manufacturers
Coffee grinder part type
Type
Filter

Eureka Olympus KR coffee grinder parts

The Eureka Olympus KR is one of the grinder models the famous Italian grinder manufacturer makes. This type of coffee grinder is a doser coffee grinder, this means that there is a storage doser on the front of the grinder which has pre-ground coffee in it, ready to use.

This model of coffee grinder has been fitted with conical grinding blades, instead of the flat version. These conical grinding blades have a right turning direction. The outer burr has a OD of 68 and a ID of 45mm for the inner grinding burr you have a outer diameter of 49mm and a inner diameter of 13mm.

The Olympus KR coffee grinder comes only in a single phase version, with a 110V and a 220/240V. This type of grinder does require a start capacitor, where you don’t need one with a 3 phase model version.

From the grinding burrs the ground coffee is pushed towards the coffee doser. In this doser there is a certain amount of ground coffee stored. This ground coffee can be dosed by pulling a lever on the side of the doser. After a x amount of pulls the grinder will start for a couple of seconds to fill the doser again.

Coffee grinder parts - Eureka - Olympus KR

Doser spring 4.5x12mm

The spring on this product page is a OEM/original Eureka coffee grinder spare part. You can find this spring on coffee grinders made by Eureka and Nuova Simonelli. The part reference for this item is for Eureka 6002.1286 and for Nuova Simonelli 15050014. This coffee grinder spring has a outer diameter of 4,5mm and a length of 12mm. This compression...
€3.75

Eureka Olympus coffee hopper

The item on this product page is a OEM/Original Eureka coffee hopper. The Eureka part reference for this item is 5210.0000 This coffee hopper comes as a complete set, including the shutter (5210.0003) and the hopper lid incl logo (5214.0000). This hopper has been made in Italy. This hopper can be used on the Eureka Olympus KR and the Eureka Olympus 75.
€132.94

Eureka pin spring 4x12mm

The item on this product page is a OEM/Original Eureka spare part. This item is as well used with Nuova Simonelli Coffee grinders. The part reference for this item is for Eureka 6002.2319 and for Nuova Simonelli 15800026. This small compression spring has a outer diameter of 4mm. the length is 12mm. This spring has been made in Italy. You can use...
€4.36

Eureka Olympus doser return spring rh

The item on this product page is a OEM/Original Eureka spare part, which is used in various coffee grinders. The Eureka part reference for this item is 6002.3580. This doser lever returning spring is used on the right hand side levers. This spring has been made in Italy. This original lever return spring is used on the Eureka Olympus KR and the Eureka...
€10.81

Eureka red indicator light 230V

This red indicator light can be used on various Eureka coffee grinders. The part reference for Eureka for this indicator light is 1005.2220. This indicator light has the colour red. The head has a diameter of 20mm. the hole needs to have a diameter of 10mm. the wire length of this light is 200mm. This indicator light has been made in Italy. You can use...
€10.81

Microswitch Rold VRSRB1DA1

This microswitch can be used with a huge variety of coffee grinders. This ranges from Casadio, San Marco, La Cimbali, Vibiemme, Cunhill, Eureka, La Spaziale, Brasilia and so on. For the complete list check the extra info tab for brands, models and product codes The specific microswitch is mainly used as a doser microswitch in the coffee doser. This...
€6.01