Basics on Espresso machine heating elements 
Espresso machine safety valves 
What kind of knock boxes are available? 
Faema E61 espresso machine Water inlet gasket
Water inlet gasket
There are 35 products.Coffee and espresso machine water inlet gasket parts
Faema E61 gasket PTFE 36.5x30x2mm
This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...
PTFE gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
Valve gasket 15x6x3.5mm
On this page you will find a flat EPDM gasket. This gasket is used as a valve seal in the steam and water valves. This specific valve gasket has the La Spaziale reference 00221. The valve gasket has a outer diameter of 15mm a inner diameter of 6mm and a thickness of 3,5mm. the sealing material is EPDM. This gasket can be used in various La Spaziale...
PTFE gasket 20x17x2mm
This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
La San Marco steam/water valve inlet...
This flat EPDM gasket is used on only 1 brand of espresso machine. The brand La San Marco. This gasket is used in the water inlet tab and the steam and water valves. The La San Marco part reference for this gasket is 109024 and CTSGUA0110. This flat EPDM gasket has a outer diameter of 15mm and a central hole which has a diameter of 5,5mm. The...
O ring 15.60x1.78mm EPDM
The o ring on this product page can be used on various Brasilia water inlet valves. The Brasilia part references for this o ring are 01390.0.00.02, 0139000002 and 02107.0.00.04. This o ring is made from EPDM. The cord diameter is 1,78mm. The internal diameter is 15,60mm. This o ring is made in Italy. This o ring can be used on the Brasilia...
PTFE gasket 1/4" 11,5x8,5x2mm
The item on this product page is a PTFE gasket which can be used to seal on a inner ¼”fitting. Such as on a ¼”end cap. This PTFE gasket has a outer diameter of 11,5mm a inner diameter of 8,5mm and a thickness of 2mm.
Astoria Wega tap gasket 14x7x5mm
The item on this product page is a lip seal which is used on a water inlet system. You can find this lip seal with various Astoria and Wega espresso machines. The Astoria part reference for this item is 12205 and the Wega part references are W10527 and WY12205. This lip seal is used to seal off the manual filling shaft. The outer diameter is...
Expansion valve gasket 15/6x10mm
The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...
Faema E61 valve gasket 13x4x4mm
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
Faema conical gasket 12x4x4mm
the gasket on this product page is a conical shaped gasket. This item can be used on various espresso machine brands such as Faema and Cimbali. This gasket replaces the one used on the inlet valve system, so you don’t have to purchase the complete brass valve parts. The Faema part reference for this item is 1186128 This gasket has been made from...
Faema E61 valve gasket 15,5x7,5x4mm
This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
O ring nbr 8,9x1,9mm
This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview
O ring 18,72X2,62 EPDM
The o ring on this product page can be used on various espresso machine brands such as La San Marco, Cimbali and Brasilia. The Brasilia part reference number is 00800.0.00.02, the Cimbali part reference numbers are 400343000 and 400-343-000. For San Marco the part reference number is 109061. This o ring is made from the material EPDM. The cord...
San Marco Gasket PTFE 12x8x4mm
The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050 Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...
Rubber flat gasket 13x4mm
This blind gasket is used with Rancilio espresso machines to seal off the steam valves. The Rancilio part number for this item is 36301105. The blind gasket on this page has a outer diameter of 13 mm and a thickness off of 4mm. The models which use this specific spare part are the Rancilio Classe 10, Rancilio Classe 9, Rancilio Classe 8, Rancilio...
Follow us