Astoria Perla
The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001
This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....
€2.77
O ring 15.08x2.62mm EPDM
On this product page you will find a EPDM o ring. This o ring is used in a variety of espresso machines and applications. With brands like Astoria, San Marco, Wega, La Pavoni and Brasilia.
The o ring is made from EPDM. The thickness of the cord is 2,62mm and the internal diameter of the o ring is 15,08mm
This part is used mainly in brewing groups with...
€0.95
Parker 3 way solenoid valve stainless steel 220/240V 50/60Hz
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100
As mentioned...
€82.93
T fitting brass 1/4" MMM
The item on this fitting page is a 3 way T fitting. This fitting has on each side a ¼”male fitting, made in Italy.
This T fitting has a nickel finish on it, it is possible that you get one without the nickel finish.
On each side the thread used is a ¼”BSP-G fitting in the male configuration.
You can use this T fitting in...
€4.08
Tap joint washer 26x16,5x1mm
The item on this product page is a brass washer, this washer can be used in steam and water valves of various espresso machine brands. You can use this brass washer on valves made by Marzocco, Faema, Astoria and Wega. The part references are for Faema 4051052071, for Marzocco L165/2, for Astoria 25651 and for Wega WY25651
This...
€1.75
Astoria/Wega water level nut 1/2" 12mm
This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383
This sight glass nut...
€6.68
Portafilter gasket 72x56x8mm
On this page you will find a portafilter gasket suitable for various brands like Grimac, Astoria, Bezzera, Wega and Brasilia.
This portafilter gasket is made in Italy. The outer diameter of the gasket is 72mm, the inner diameter is 56mm and the thickness of is 8mm.
You can use this portafilter gasket on brewing groups like the Grimac G11, Brasilia...
€2.99
Steamtube anti scorch clip
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube.
This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€1.92
Astoria wega water inlet tap piston
The item on this product page is a OEM/Original Astoria CMA spare part. This item is used with Astoria and Wega espresso machines. The part reference for this item is for Astoria 25615 and for Wega W10546 and WY25615.
This item has been machined from brass and it is made to hold the flat sealing gasket.
You can use this inlet gasket...
€8.91
Astoria single coffee portafilter
The single portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311050 and 8327311050R
This single portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear thickness of 6mm....
€50.65
ABB contactor switch 20A 220V
The contactor shown on this page is used in various espresso machines made by Astoria/Wega. The Astoria part reference for this item is 20299002 and for Wega the part reference is WY20299002 . This specific model of contactor is made by the German company ABB, the model is B7-40-00. The ABB part reference for this item is ABBEM5731
This ABB...
€93.10
Astoria and wega level glass cover painted white
On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002.
This...
€11.12