Astoria Perla - Steam/water valve

The article on this page is a steam and water valve body for Astoria and Wega espresso machines. This item has been casted and machined out of brass. The Astoria Reference is 53003 and the Wega reference is WY53003. The casted steam and water valve has multiple threads machined into it. The inlet thread is a 3/8” BSP-G and the connection for the...

The compression spring on this page is mainly used with the steam and water valves on the Astoria and Wega espresso machines. But it has also multiple purposes in the steam valve. This item is a OEM/Original item. The Astoria part number is 10452 and the Wega part number is WY10465. This compression spring is used to put pressure on the shaft gasket...

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...

The espresso machines of Astoria and Wega use in most cases the same types of water and steam valves, but there are some differences in components. On this page you will find the water and steam valve shaft assembly with a pin length of 83mm. This assembly is complete and can be screwed into the valve body right away. The Astoria part number for this part...

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...

The valve shaft gasket on this page is used with basically every steam and water valve manufactured for Astoria and Wega espresso machines. This gasket makes sure that there doesn’t leak any steam or water past the shaft of the valve. The Astoria part reference is 12204 and the Wega part reference is WY12204  This gasket has been made out...

This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001  This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...

The steam and water valve nut on this page can be used on almost every Astoria and Wega steam and water valve. This axle nut makes sure that there is a constant pressure on the valve shaft spring, which prevents leaking from the valve shaft. This item is a OEM/original Astoria/Wega spare part. The Astoria part number for this item is 25385001 and...

The valve fitting on this page can be found on almost every Astoria and Wega steam and water valve. This coupling holds the steam axle and valve gasket holder in place when in use. The item screws into the valve body. The Astoria part number for this item is 25678001. The Wega part number for this item is WY25678001  You can find this fitting on...