Grimac Twenty

The heating element on this page is suitable for a 3 group Grimac espresso machine. The Grimac part reference of this heating element is 1240100129-GRT103. This heating element is 4500W at 230V. The element has a 4 pole connection. The immersed length of the element is 345mm. This element is a screw in element and has a 1”1/4 flange. The suitable...

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...

Stainless ball 8mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded blue silicone....

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

On this page you will find a 2 way solenoid valve made by the company Parker.  This specific Parker 2 way solenoid valve is used with various brands as a water inlet valve for filling the boiler.  The Parker parts number for this item is 393233J This 2 way solenoid valve is one of the types which has a flange model, this model is sealed with...

The item on this page is a water outlet for various Grimac espresso machine models. This item is a OEM/Original Grimac spare part which has the part reference numbers 1260100017 and GR167. This water tube is complete and ready to install. You can use this outlet on the Grimac G10, Grimac Zola I, Grimac Zola II, Grimac Twenty and the Grimac Eclisse.

The valve shaft on this page is suitable for various Grimac espresso machines. This steam and water valve axle has the Grimac part reference 1201100038-GR090  This steam and water valve axle does not come with the sealing o rings, these need to be bought additionally. This item has been manufactured in Italy. This steam and water valve axle can be...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

On this page you wild find a IPC clamp ring motor(model YDK94/50-4-150B8), suitable for the use with espresso machine pumps. This motor has a wattage of 150W with 220/240V 50/60Hz. To start the motor it uses a 6 µf capacitor. This model is a clamp ring motor, so the pump will be attached to the clamp ring of the espresso machine motor with a...