Faema E98

The steam and water valve on this page is used on most La Cimbali espresso machines. But you can find this model as well on Casadio and Faema espresso machines. For the part references check the extra info tab on the side. This complete steam and water valve has been casted out of brass and machined afterwards. The valve has 2 connections. For the steam...

On this product page you will find a stainless-steel water and steam valve compression spring. This spring has multiple purposes. It holds the steam and water wand at a fixed location and keeps pressure on the PTFE ball gasket. This compression spring can be used with the brands Casadio (485061010 ) Cimbali (485061010) and Faema (485061010) This...

On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010. This PTFE gasket, it is not white as you would expect with PTFE, has a...

The steam and water valve knob on this page can be used on various Faema and La Cimbali espresso machines. The part reference for La Cimbali is 495-764-000 and for Faema 495764000. This steam wand water valve knob doesn’t come with the spring which holds the steam and water valve knob in it’s place. This item has been manufactured in Italy....

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 4 holes, all of them have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on...

The spring on this page is used a handle spring on a variety of espresso machine models manufactured by the Cimbali group. This spring keeps pressure on the internals of the handle which hold the handle in place. The Cimbali part number for this item is 485-154-000 and the Casadio part number is 485154000  The spring itself is made from spring...

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...

If you have a chrome plated or stainless steel steam tube and you want to move the tube when it is warm. It is likely that you will burn your hands. On this page you will find a rubber sleeve which prevents this. This sleeve can be used on a large selection of steam tubes which have a diameter of 8mm. The overall length of this sleeve is 50mm and has been...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

After a while you do need to replace your steam nozzle, this can be because of various reasons. This specific model is made from brass and then chrome plated. The interior thread, which threads onto the wand, is a 1/8”BSP-G. The steam nozzle has 4 holes each of 1,5mm in diameter. To make it easier to clean this steam tip, they have made a flat...

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when...

On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...