Filter by
Type part
more... less
Type
Price
Filter

Faema E98 President parts

The Faema E98 President espresso machine is the oldest version of the E98 series. This model was introduced around the turn of the century. This espresso machines has been made in various configurations. You have the A model and the model S. The model S is the non volumetric, the A model is the volumetric model. They are only available in 2 group versions.

As mentioned earlier this model is only available in a 2 group version, this means you only have one type of boiler which is powered with a 2440/2900W heating element. The brewing group installed on the Faema E98 President is one which is a standard Faema brewing group, note: this brewing group does not have a adjustable flow regulator installed.

If you are not entirely sure which components you require for your Faema E98 President, don’t hesitate to contact us.

Faema E98 President parts

IMS filter basket removal tool

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...
€7.36

O ring 25,07x2,62mm EPDM

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...
€0.74

E61 style groups shower without welding 60mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
€3.32

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€2.75

Tap joint gasket 14.5x7.5x6 mm

On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010. This PTFE gasket, it is not white as you would expect with PTFE, has a...
€0.84

Nuert flange pump 150 L/H compact

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...
€103.39

Cimbali/Faema Stainless steel water tube 130mm

The water tube on this product page can be used with various Cimbali and Faema espresso machine models. The Cimbali part references are 920739030 and 920-739-030. This water pipe has been made from stainless steel. The fixing nut has been made from chrome plated brass. The total length is 130mm and the tube has been fitted with a sleeve to prevent...
€26.47

Faema E61 legend sight glass

The sight glass on this page is different then the traditional tubular glass. This is a flat piece transparent level glass, note it is made from polycarbonate. This type of level glass can be used with various brands such as Faema, La Scala and La Cimbali. The Cimbali part references for this item are4831130683  and 4831-130-683. For Faema the part...
€6.44

Solenoid valve connector

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
€2.29

Faema heating element 3780W 220V original

On this page you will find a original heating element suitable for espresso machines made by the Cimbali group. You will find this heating element in brands such as Cimbali(911-544-010 ) and Faema (911544010 ) 2 group espresso machines. This element produces 3780W at 220V, the element has 6 connecting terminals. The immersed length is 295mm....
€84.41

Portafilter gasket 72,7x57x8mm orange silicone

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...
€3.72