Filter by
Type part

Faema E98 President - Brewing group

The brewing group on a espresso machine is one of the most important components. This is also the case with the Faema E98 President. The brewing group which is installed on the President is a standard modern Faema brewing group.

This type of brewing group is a solenoid valve operated group head. The heated water for the brewing group is coming from the heat exchanger(HX) in the boiler. This water flows into the group and true the nozzle, this brewing group does not have a regulator, and then true the head towards the shower screen. The shower screen used is a 60mm model, the portafilter gasket has a outer diameter of 74mm and a inner diameter of 58mm.

The filterbasket used on the Faema E98 espresso machines have a ear orientation of 90 degree and a ear thickness of 7mm. The filterbaskets compatible with this model have a outer diameter of 70mm.

Faema E98 President - Brewing group

Wera shower screen screwdriver philips

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

IMS double filterbasket 12/18gr B702TH24.5M

A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The...

Philips head stainless steel screw M5x20mm

On this page you will find a stainless-steel screw which holds the shower in place. This screw is used with a variety of brands such a Casadio, San Marco, la Cimbali, Astoria and Wega. This screw has a Phillips head screw and is made from stainless steel. The screw thread is a M5 with a thread length of 20mm. This screw is according to specs of UNI 7688...

Ffilterbasket 2 coffee 14gr 70x24,5mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...

O ring gasket 6.07x1.78mm Solenoid valve

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

Faema P4/P6/E64/E66 nozzle

The nozzle on this product page can be used on a variety of Faema brewing groups. This nozzle has been made from a male M10 with a thread pitch of 1mm. The hole in the middle is 0,5mm. You can use this gigleur on the Faema Due, Faema E91, Faema E92, Faema E97, Faema E98, Faema Express, Faema E98 president and the Faema Smart.

Shower net caulked 51,5mm

The shower screen on this page is one of the most commonly used screw in showers. The manufacturer of this shower screen is IMS Filtri, the part number of this item is IMSDR310. IMS filtri doesn’t only make competition shower screen but just also regular screens. This shower screen has a diameter of 51,5mm. the central hole is suitable for a m5...

Parker 3 way solenoid valve 24V 50/60Hz

On  this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....

Lucifer solenoid 3 way base mounting 220/240V 50/60Hz

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

Portafilter gasket 72,7x57x8mm orange silicone

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...