Aurora-Brugnetti - Steam/water valve
Aurora-Brugnetti - Steam/water valve
There are 22 products.Aurora-Brugnetti Steam/water valve parts
PTFE gasket 20x17x2mm
(0) This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
Steam and water valve spring bushing
(0) The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
Spring for steam and water valve 10,5x32mm
(0) This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
O ring gasket 6x1.2mm
(0) The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
Water stem complete
(0) The item on this page is a complete water stem. This item can be used on variety of espresso machines such as San Remo, Vibiemme, La Scala, Grimac, Pavoni, Rocket and Gaggia. This water stem has a 1/8” BSP-G female thread. The water stem does have the filter membrane inside, this can be replaced. The item has been made in Italy. This water stem...
Tap joint o ring 16x2mm EPDM
(0) The o ring on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and La Spaziale. The part reference for Spaziale is 08289 and for Nuova Simonelli and Victoria Arduino it is 02280037. This o ring is made from EPDM. The cord diameter is 2mm and the inner diameter is 16mm. This o ring has been made in...
La San Marco steam/water valve nut
(0) The item on this page is a brass low nut. This nut can be used on various La San Marco steam and water valves. This item has the La San Marco part references 205007 and CCMMIN0820. You can use this tap fitting on the La San Marco 85, La San Marco 95, La San Marco 100 and the La San Marco 105.
La San Marco steam/water valve gasket spring
(0) This steam and water valve compression spring is used in a variety of La San Marco espresso machine models. The La San Marco part reference for this item is 200033 This compression spring is made from stainless steel and has a outer diameter of 16mm. the overall length of this spring is 20mm. The item has been made in Italy. You can use this...
Valve rod washer 18x6.4x1.6mm
(0) The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
Split pin 2x10mm
(0) the item on this product page is a stainless steel split pin. This pin can be used on various steam and water valves used on Marzocco, Carimali, San Remo, Faema and La Scala espresso machines. The Carimali part reference number is 94.00092, the Faema part reference number is 4061024965, the Marzocco number is L165/8 and the San Remo part reference number...
Crushable copper washer 22x16.5x2.2mm
(0) The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...
Steamtube anti scorch clip
(0) The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
La San Marco steam water valve camme
(0) The lever spindle on this page is used on various La San Marco espresso machines. The La San Marco part references are 400004I, 502004 and BVASS0800. This handle transfers the vertical motion of the lever to a horizontal motion, for opening and closing the steam and water valve. This item has been made in Italy You can use this lever spindle...
Faema steam/water valve knob
(0) The item on this product page is a steam and water valve knob. This steam and water valve knob can be used on various espresso machine brands such as Marzocco and Faema. The Marzocco part reference number is L165/V. This valve knob has been made from a black plastic. The valve knob does not come with the plastic insert. On the inside is a threaded brass...
Faema water valve knob insert
(0) The item on this product page is a water valve knob insert. This white water valve insert can be used on espresso machine brands such as Marzocco and Faema. The Marzocco part reference number is L165/MA. This water valve insert is made from a white plastic. The item itself has been made in Italy. This valve insert can be used on the Marzocco...
Faema Steam knob insert
(0) The item on this product page is a steam valve knob insert. This white steam valve insert can be used on espresso machine brands such as Marzocco and Faema. The Faema part reference for this item is 4831131214, for Marzocco the part reference number is L165/MV. This steam valve insert is made from a white plastic. The item itself has...
