Filter by
Type part

Faema E98 President - Boiler

The boiler system on the Faema E98 president is just made in 1 type of configuration, seen there only exists a 2 group version. It doesn’t matter if you have the volumetric (A) or the non volumetric version (S).

The boiler used on the President is a closed heat exchanger(HX) boiler, int his boiler the HX for each group are diagonally placed inside the boiler. With on the top the feed and the top the fittings for the return tubes. On top of the boiler you will find a safety valve and a level probe. As well as a pressure switch.

This boiler is powered with a heating element which produces 3750-4500W of power at 220/240V. In the middle of this heating element is a spare tube for a heating element thermostat, to prevent overheating of the heating element.

Faema E98 President - Boiler

La Cimbali M39 boiler manometer 0 - 2.5 bar

You can find on this product page a small boiler pressure manometer. This model has been used in various La Cimbali and Faema espresso machines.  The Cimbali part reference for this item is 3781-133-400 and for Faema 3781133400. There are more product references for this item, you can find those in the extra info tab. This pressure gauge is used for...

Faema heating element 3780W 220V original

On this page you will find a original heating element suitable for espresso machines made by the Cimbali group. You will find this heating element in brands such as Cimbali(911-544-010 ) and Faema (911544010 ) 2 group espresso machines. This element produces 3780W at 220V, the element has 6 connecting terminals. The immersed length is 295mm....

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...

La Cimbali pump manometer 0 - 16 Bar

On this page you will find a small pump manometer, one of the smaller models. This model you mainly see used with the La Cimbali group. The la Cimbali part number for this item is 3781-133-399 and Faema part number is 3781133401  This manometer is a pump manometer with a pressure range of 0 – 16 bar. The rim diameter of this pressure gauge is...

Faema heating element 2 group 3750/4500W 230/400V

On this product page you will find a heating element used for a variety of espresso machines made by the La Cimbali group. This specific heating element is suitable for a 2 group espresso machine. You can use this element with various brands such as Cimbali, Faema and Casadio. This heating element produces 3780/4500W at 230/400V, the element has 6...

3 phase safety thermostat 169-18°

On this page you will find a three phase thermostat. This item is used in a variety of espresso machines. You can find this thermostat with brands like Cimbali Faema and Casadio. This 3 phase thermostat is made by the German company E.G.O. in Germany. The switching off temperature of this thermostat is 169°C and needs to be reset manually by pushing...

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...

Asco (Sirai) pressure switch P302/6

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

Casadio/Cimbali/Faema heating element cover

The item on this product page is a heating element cover for various espresso machine brands of the La Cimbali group. This heating element cover is used on various model of Casadio, Cimbali and Faema. The Casadio part reference number is 4831135020, the Cimbali part reference number are 4831135020 and 4831-135-020. For Faema the part reference number...

AFM 34 heating element gasket 57x43x3mm

The heating element gasket on this page can be used on a variety of heating elements. This gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. The fibre material used is AFM 34 made by the German company Victor Reinz. This gasket material is food safe and can handle the pressure and temperatures which occur in every...