The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100
As mentioned earlier this solenoid valve base is made from stainless steel, with a NSF certification. The coil installed is a 220/240V at 50/60Hz and is a 9W version with the code 483510S6 XS03XS6 F. The diameter of the orifice is 1,5mm, to seal off this orifice they have installed a Ruby seal. The drain section has a male 1/8” BSP-G thread
The operating limitations of this solenoid valve are quite broad. The maximum working pressure of this solenoid valve is 14bar. The minimum fluid temperature is -40 degree C and the maximum fluid temperature is 140degree C.
This solenoid valve can be used on brewing groups of San Remo and La Spaziale espresso machines.
Looking for similar items or different specifications for this Parker 3 way solenoid valve stainless steel 220/240V 50/60Hz?
Explore our full range in the Astoria, Casadio, La Cimbali categories
*
This part is compatible to the original part number. Part numbers are always leading.
The valve on this page is the Parker valve body. This valve body is made from stainless steel, with NSF rating. The model is called the 3019F1GVG7 and has on top of the body a female 1/8” BSP-G thread. Inside this solenoid valve there is a central hole, orifice, of 1,5mm. This is sealed off with a plunger with a FKM seal, which is rated up to 14 bar.
This solenoid valve coil is made by the company Parker. This coil is the WB4.5 this is a 6w coil which is powered by 110/120V at 50/60Hz. The part reference number for this coil is 304260.
On this page you will find a 2 way solenoid valve made by the Parker company which isn’t that common model. This model is mainly used on San Remo as a water inlet valve solenoid. The Parker part number for this item is 397892
This solenoid valve is a 2 way solenoid valve which is a flanged model. This valve seals to a other surface with 2 small o rings,...
This parker solenoid valve body is a 3 way valve body. This specific model is called the 3019F1LRG7. This valve body is made from stainless steel and is nsf certified. The valve has a inlet port which has a diameter of 2,5mm. this is sealed off with a plunger with a ruby seal. This plunger is rated up to 14 bar. The exhaust section of the solenoid valve...
This diaphragm is made by the company Parker, it is model PM7321, formerly PM133. This diaphragm has the Parker part reference numbers: 306120, 306120P and 306120SP
This solenoid valve body is a 2 way valve. So it doesn’t have a exhaust port on the top. The valve body itself is made from stainless steel, nsf certified. The model of valve is called the 2019F1GVG7 and is made in Italy. The central hole in the valve has a diameter of 1,5mm and is sealed of with a FKM gasket in the plunger.
On this page you will find a 3 way solenoid made by the parker company. The Parker part number used for this solenoid valve is 393430J
This solenoid valve has a threaded in and outlet which are both 1/4” BSP-G. the exhaust valve is a 1/8” BSP-G thread which is conical. This specific valve has a 9W coil which is a 220/230V at 50/60Hz. The coil part number...
This parker solenoid valve body is a 2 way valve made from stainless steel. This model is called the 2019F1LVG7. This version has a orifice, central hole, which has a diameter of 2,5mm and is sealed of with a FKM seal. The valve is NSF certified.
