Vibiemme modern solenoid group
Vibiemme modern solenoid group
There are 22 products.This brewing group is one of the newer brewing groups the Vibiemme brand uses. This is also a solenoid valve operated brewing group.
On the bottom of the brewing group you will find a 3 way Parker solenoid valve, with a moulded cable to it. You won’t find this on any other espresso machine brand.
In the brewing group is a nozzle/jet installed with a stainless steel water filter over it. The spray nozzle this model of Vibiemme brewing group uses is rather small. It has a diameter of 21mm and a thread of M6x1mm.
The portafilter gasket used on this group has a outer diameter of 73mm a inner diameter of 57mm. For this VBM group you can use the standard VBM portafilter with the 5,5mm ears.
You will find this brewing group on the Vibiemme Evolution, Vibiemme Kometa, Vibiemme Lollo, Vibiemme Minimax and the Vibiemme Silver.
E61 style groups shower without welding 60mm
(0) The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this...
Brewing group gigleur 0.6mm
(0) This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
Filterholder suplement gasket 73x59x0.8mm
(0) The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
Stainless steel filter 8.6x22.5mm
(0) The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...
E61 style group spout breaker
(0) On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
E61 shower screen old style 60mm
(0) This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070. The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm...
PTFE gasket 35x30x2mm
(0) The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
Filterholder gasket 72.5x57x8 mm
(0) The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been...
O ring gasket 6.07x1.78mm Solenoid valve
(0) This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...
PTFE gasket 26x21x2mm
(0) This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
Vibiemme solenoid group locking gasket
(0) The group locking gasket on this product page is used with a variety Vibiemme solenoid groups. The Vibiemme part reference for this item is GUARGRKO. This paper gasket is rectangular with 5 holes. The gasket is 72mm with 64 mm and a thickness of 2mm. This gasket has been made in Italy. You can use this group locking gasket on the Vibiemme Evolution,...
Shower with net and rays caulked 60mm
(0) The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen. This...
Portafilter gasket 73X57X8.5mm
(0) This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
Vibiemme single coffee portafilter original
(0) The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...
Vibiemme 2 coffee portafilter original
(0) The portafilter on this product page is a OEM/Original Vibiemme spare part. The Vibiemme part reference for this double portafilter is ASPORTN2TAMON. This portafilter has a closed double spout, this cover can be removed for cleaning. The ear orientation on this portafilter is 90 degree. The thickness of the ears is 5,5mm. This portafilter does come with...
Filterholder gasket 73x57x8mm
(0) On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...
portafilter gasket 74x57.5x8mm
(0) The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...
AFM 34 gasket 26x21x2mm
(0) This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
