Vibiemme E61 style group
This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.59
Knob M8x1,25mm
This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg.
This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy.
You can use this...
€7.51
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.17
Wera shower screen screwdriver philips
It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...
€11.50
Portafilter gasket 73X57X8.5mm
This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac.
Of this...
€3.34
Vibiemme infusion valve 62mm
This brewing valve is a complete valve assembly suitable for the Vibiemme E61 style lever brewing group.This complete valve exists out of 5 components. The triangular rod, a gasket holder, the gasket, a small brass washer and the square valve pin. All espresso machine parts make the total length of the valve assembly 62mm.The Vibiemme part number for this...
€14.68
PTFE gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.10
Brewing group gigleur 0.6mm
This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...
€1.26
Complete valve spout 54,6mm
This complete spout valve is located in the top section of a E61 style brewing group. Used on the E61 style groups like the lever group made by VBM ASSVALVEROG, Brasilia 09453.4.00.09, ECM Heidelberg C219900424 and Expobar CTAV1-24 brewing groups.
This spout is a assembly out of multiple items, the round shaft, gasket holder, gasket and the square pin on...
€9.73
Faema E61 camme spring 15x25mm
This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group.
Besides that option, this model...
€1.21
E61 cam lock stainless steel m6
This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver.
This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...
€5.29
Faema E61 group infusion spring
On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.29