Vibiemme Domobar Junior HX steam valve

On this page you will find a complete water pipe for a Vibiemme espresso machine. Models which use this type of are the Vibiemme Domobar Junior and the Vibiemme domobar Super. This water pipe exists out of 3 components. The water tube itself, the water pipe nozzle and the connecting nut to the valve. The inserts for the water pipe nozzle are generic...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

On this page a steam valve is shown which is suitable for the Vibiemme Domobar espresso machine. The Vibiemme part reference for this item is RACCRUBSC. This valve is a complete steam valve and ready to install. The fittings on both sides are a male ¼”BSP-G thread. This valve has been manufactured in Italy. Note: this Domobar steam valve does not come...

The steam wand on this page is for a Vibiemme(TUBILADOMSU ) Domobar espresso machine. The developed length of the tube is 260mm. the tube itself has a diameter of 8mm. The tube comes with a steam tip with 2 holes and the steam pipe nut to connect the steam tube to the steam valve of the Vibiemme Domobar. If you are not sure if the steam tube is suitable...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel...

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...

On this page you will find a flat silicone gasket. This silicone gasket is 10x5mm.  It is being used in 2 applications with Vibiemme ( GUARSILRUDOSU ) espresso machines. The first is in the steam and water valve of the Vibiemme Domobar and in the expansion valve used in the Domobar super. If you are not sure if this silicone blind gasket is suitable for...

Vibiemme water / steam valve axle 52mm

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...