Vibiemme Domobar Junior HX

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...

On this page you will find a complete water pipe for a Vibiemme espresso machine. Models which use this type of are the Vibiemme Domobar Junior and the Vibiemme domobar Super. This water pipe exists out of 3 components. The water tube itself, the water pipe nozzle and the connecting nut to the valve. The inserts for the water pipe nozzle are generic...

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...

This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...

The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and  MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13  This stainless steel...

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...