San Remo Venezia - Brewing group

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra. The external diameter of this shower screen is 51,5mm...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...

The o ring on this product can be used on various espresso machine brands such as San Remo, Elektra, Spaziale, Victoria Arduino and Brasilia. The part reference numbers can be found in the extra info tab on this product page. This o ring is made from EPDM. The cord diameter is 2,62mm, the internal diameter is 47,30mm. This item has been made in Italy....

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded red silicone....

The portafilter gasket on this page can be used on various espresso machine models such as ECM Heidelberg, La Pavoni, Rocket and Wega. The part references for this item are for La Pavoni 361014, for ECM Heidelberg C449900229 , for Rocket C449900229 and for Wega W10321/ WY12227  This portafilter gasket has been made from NBR with shore 75. This portafilter...

The portafilter gasket on this page can only be used on various San Remo espresso machines. The San Remo part reference for this item is 10502038. This filter holder gasket has been made from NBR. The outer diameter of this gasket is 73mm the inner diameter is 57mm and the thickness is 8mm. The gasket has 4 external cuts. The item has been made in Italy....