On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J
This 3-way solenoid valve is a model with a flat flange, this flange is sealed with 4 Allen head screws. To make a watertight connection between the flat surfaces there are 2 o rings in between. The diameter of the orifice on the inside of the valve is 1,3mm and it is sealed of with a ruby seal.
The coil used on this solenoid valve is a 9W 110/120V at 50/60 Hz, the coil number is ZB09. The operating pressure of this solenoid valve is max 20bar. The maximum fluid temperature of this valve is 140 degree C, the minimum temperature is minus 40 degrees Celsius.
This solenoid valve can be used on a variety of espresso machine brands such as Aurora Brugnetti, San Marco, San Remo, La Scala, Bezzera, Cimbali, Faema Nuova Simonelli, La Pavoni, Wega , Victoria Arduino, Brasilia and so on. For the complete model list check out the extra info tab on this page.
Looking for similar items or different specifications for this Parker 3 way solenoid 110V 50/60Hz conical?
Explore our full range in the Astoria, Bezzera, Brasilia categories
*
This part is compatible to the original part number. Part numbers are always leading.
Adria
Argenta
Brava
CK
CKE
CKX
CKXE
Denise
Dora
Lisa
Pratic
Pratic new
Bezzera
B2000
B2006
B3000
B6000
Ebbis
Ellisse
Brand
Astoria
Bezzera
Brasilia
Faema
Grimac
La Carimali
La Cimbali
La San Marco
La Scala
La Spaziale
Nuova Simonelli
Parker
Rancilio
San Remo
Victoria Arduino
Wega
This specific solenoid valve body is the model 3019F1GRG7. It has on the top a female drain which has a 1/8” BSP-G thread. The central hole, orifice, has a diameter of 1,5mm and is sealed of with a ruby seal. The coil itself is rated up to 14 bar pressure. The housing is made from stainless steel and is NSF rated. The temperature rating is from -40 degree...
This solenoid valve is made by the brand Parker. The valve itself runs at 220/230V 50/60Hz, with 6W. the valve has a length of 22mm a height of 30,5mm and a length of 32,5mm. This product is made in Italy.
This coil can be used on parker solenoid valves used on Bezzera espresso machines and on GBG granita machines. Always make sure that the part numbers...
This solenoid valve body is made by the Parker brand. This body is made from stainless steel and NSF certified. The model is called the 2019F1LRG7 and this is a 2 way valve. The orifice, central hole, has a diameter of 2,5mm and is sealed of with a small ruby in the plunger. The valve body is rated up to 20bar working pressure.
This solenoid valve body is made by the brand Parker. The valve body is called the PM128IV. This specific type of valve body is a 3 way valve, with on the top a 1/8” BSP-G exhaust port. Inside the valve you have a central hole, orifice, which has a diameter of 1,3mm. This hole is sealed of with a FKM seal. The plunger it seals of is rated up to 20bar.
This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J
This solenoid valve is a 3 way valve. The...
This 3 way valve body is made by the brand Parker. This specific model is called the 3019F1LVG7 and is a 3 way valve. The exhaust port on top of the valve body has a male 1/8” thread. The inlet of the valve has a diameter of 2,5mm and is sealed of with a FKM valve inside the plunger. This valve is rated up to 14 bar.
With a standard flange solenoid valve you only need 2 small o rings to seal this off, this is the case with brands such as Asco/sirai, Parker, Lucifer and Ode. But the brand Parker has also stainless steel solenoid valve, which use a o ring and a outer gasket, which is not a o ring.
This type of gasket used on various espresso machine brands such as...
The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100
As mentioned...
