Parker 2 way valve body 2019F1LVG7 stainless

This plunger is made by the Italian company ODE and has the part reference R450898/V. this plunger is used for valves in the 21A to 21L series which have a orifice bigger then 3mm. The sealing material used on this plunger is FKM. This plunger is used on vending machines made by Rheavendors.

This parker solenoid valve coil is the model ZB09, but this one is a 110/120V version. So make sure that you don’t install this on a 230V valve. The coil itself is a 9W version and is powered by 110/120V at 50/60hz. This coil has a width of 34mm a height of 33mm and a length of 43mm. This coil is made in Italy. It can be used with various applications...

This solenoid valve body is a 2 way valve. So it doesn’t have a exhaust port on the top. The valve body itself is made from stainless steel, nsf certified. The model of valve is called the 2019F1GVG7 and is made in Italy. The central hole in the valve has a diameter of 1,5mm and is sealed of with a FKM gasket in the plunger.

This solenoid valve body is the PM128ISV which is a 3 way valve. The exhaust side of the body has a 1/8” BSP-G thread, which is conical.  The plunger inside the valve is rated up to 10bar and is sealed of with a FKM gasket. The central hole the gasket seals of has a diameter of 1,3mm.  The part reference number for this valve is 128ISV.

This parker solenoid valve body is a 3 way valve body. This specific model is called the 3019F1LRG7. This valve body is made from stainless steel and is nsf certified. The valve has a inlet port which has a diameter of 2,5mm. this is sealed off with a plunger with a ruby seal. This plunger is rated up to 14 bar. The exhaust section of the solenoid valve...

This solenoid valve is made by the Italian company ODE. This specific model of solenoid valve is a 8W 24V AC model. It has the part reference number RBDA08024AS.

This solenoid coil is made by the Italian company and is part number LBV08024HU/RLBV08024HU. This coil produces 10W with 24V DC. This type of coil is used on various Necta vending machines.

The solenoid valve body on this page is made by the Italian company Parker and has the part reference number E131F4304G. This valve body is a 3 way valve. The valve itself has a central hole, orifice, of 1,5mm. This orifice is sealed off with a plunger with a ruby seal. This plunger is rated  up to 10 bar. This valve body is used on a variety of espresso...