4.18 € بدون ضرائب.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
The item on this product page is a heating element gasket for various Bezzera and San Remo espresso machines. The San Remo part reference for this item is 10502020 and for Bezzera the part reference is 5494016
This heating element gasket has been made from PTFE. The outer diameter is 56mm, the inner diameter is 42mm and the thickness is 2mm.
You can use this heating element gasket on the Bezzera Unica, Bezzera Matrix, San Remo Verona, San Remo Verona RS, San Remo Zoe and the San Remo Zoe Compact.
البيانات
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
