Grimac فئة الجزء

The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....

The item on this product page is a chrome nut used for a steam and water valve used with various espresso machine brands. This nut can be found on brands such as ECM Heidelberg, Fiorenzato and Vibiemme. The ECM Heidelberg part reference number is P6003.1, for Fiorenzato it is A2200264 and for Vibiemme it is RACCDAFISSRLO. This chrome plated nut...

Faema E61 stainless steel valve rod Return to the Faema E61 steam/water valve overview

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The level gauge on this page can be used on various espresso machine brand such as San Remo, Gaggia and Grimac. The San Remo part reference for this item is 10402100, for Gaggia LV0524 and for Grimac it is GR270 This sight glass has a outer diameter of 11mm and a overall length of 140mm. This sight glass has a red line running over the back and a Minimum...

The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...

This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega. This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...