La Pavoni Vasari أجزاء
The green switch on this page is used with a variety of coffee grinders and espresso machines. You will find this switch with brands such as Pavoni, Spaziale Macap, Quamar, Bezzera Cimbali and Gaggia. The part references for this item are for Cimbali 532-091-300, for Faema 532091300, for Pavoni 435072, Bezzera 7633339, Gaggia 4931C00061001, Macap...
10.04 €
صمام الأمان 3/8" 1.8بار CE PED IV
The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G
This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
10.58 €
فيما E61 صمام دود كَانَها لا تَصْدُ
This stainless-steel washer is used in a variety of espresso machine applications. This ranges from the washers to bolt on the heating element on a La Pavoni Europiccola/Professional. To a spacer in the steam valve on a Faema E61, this also includes all version which resemble the e61 valve model like with the Vibiemme, Grimac and La Scala espresso...
0.59 €
عنصر تدفئة غاجيا/بافوني
The heating element on this page can be used on various 2 group Gaggia and La Pavoni espresso machines. The Gaggia part reference for this item is 11003362 and the La Pavoni part reference is 331153 .
This heating element produces 4000/4760W at 220/240V, the element has 6 connecting terminals. The immersed length of the element is 310mm. The...
94.67 €
Faema E61 group upper plug
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special.
This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
4.10 €
E61 عصا كامي
This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut.
This...
16.14 €
o ring gasket 7,2X1,9mm nbr
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore.
With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
0.45 €
مجموعة البخار/الماء E61
Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines.
This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm.
So, steam and water valves...
1.80 €
مقياس تدفق الجيكار 1/8" وصلة 1,15mm مع led
On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G)
The fittings which can be used on the in and outlet of flowmeter are...
60.67 €
دليل الحلقات النحاسية
The item on this page is a hardened brass gasket holder for a steam and water valve. This bushing can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.5, the Fiorenzato part reference is A2200268 , the Marzocco reference is B.1.004/5 and...
4.38 €