58.95 € بدون ضرائب.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
On this product page you will find a heating element suitable for various Vibiemme single group espresso machines. The Vibiemme part reference for this element is ELETRESSM1822
This heating element produces 1800W at 230V, there are 2 connecting poles. The immersed length of this element is 140mm. The flange used is a screw in flange which has a diameter of 1”1/4.
The gasket used for this element has a outer diameter of 53mm a inner diameter of 42-43mm and a thickness of 2mm.
This heating element can be used on the Vibiemme Domobar Super and the single groups of the Vibiemme Kometa and the Vibiemme Lollo.
البيانات
This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website
Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.
Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.
To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.
A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.
