On this product page you will find a bottomless portafilter suitable for the La San Marco brewing groups. La San Marco is the only commercial brand which uses the 3 ear configuration instead of the standard 2 ear configuration. This portafilter has been manufactured in Italy. The thickness of the ears on the bottomless portafilter are 7mm instead of the...

Faema charging valve o ring 4.2x1.9mmReturn to the Faema E61 Legend water inlet parts overview

The o ring on this page is used on various models of the La Cimbali group. This EPDM o ring is used to seal off the water inlet flange on the water inlet. For Faema the part number 4701119817 is used and for Cimbali the part number 4701119817  This o ring has been made out of EPDM. The cord diameter is 1,78mm and the internal diameter of the o...

On this page you will find a boiler gasket suitable for a variety of La Cimbali espresso machines. The La Cimbali part reference for this item is 401-331-010 The boiler gasket on this page has a outer diameter of 180mm a inner diameter of 140mm and a thickness of 3mm. There are in total 6 bolt holes in the gasket. This gasket has been made in Italy. You...

The display on this page is a blue display suitable to use with a variety of models from La Cimbali and Faema espresso machines. Note: this is not a green/yellow display. The matching part numbers for La Cimbali 913-902-018 and for Faema 913902018. The blue display is suitable for a variety of traditional espresso machines as well super automatic espresso...

E61 valve guide 12mm

On this page you will find a portafilter which is suitable for various San Marco espresso machine models. The model used by San Marco is unique in it’s own way with the 3 ears and the classical rounded off handle. The San Marco part reference for this item is 1165080 The portafilter has 3 ears, These ears have a thickness of 7,4mm. This specific...

On this page you will find a bottomless portafilter for Carimali espresso machines. Carimali, next to La San Marco uses 3 ears instead of the commonly found 2 ears. This portafilter can solely be used on Carimali brewing groups. The portafilter has 3 ear lugs instead of the traditional 2. And have a thickness of 6mm. The portafilter itself has been...

Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

On this product page you will find a touchpanel membrane for the Faema E98 espresso machine. The part reference for this item is 3301134927. This touchpanel membrane has in total 5 pre-set volumetric keys. The bottom key is the continuous and the programming key. With this programming key you can adjust the volumetric keys. This item has been made in...