On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...

On this page you will find a copper gasket suitable for a variety of La Cimbali brewing groups. This gasket is mainly used to seal off the gigleur/nozzle underneath the brewing group. The La Cimbali part number for this gasket is 401234000. This gasket is a flat copper gasket. The gasket has a outer diameter of 14mm a inner diameter of 10mm and a...

The o ring on this page can be used on a variety of espresso machine brands with various applications. You can find this o ring with brands such as Faema, Nuova Simonelli, Pavoni, Victoria Arduino and Gaggia. This o ring has been made from silicone. The cord diameter is 1,78mm and the internal diameter is 3,89mm. This o ring has been made in Italy. This...

On this page you will find a water level gasket. This design of water level gasket is used with a variety of espresso machine manufacturers. Brands like La Cimbali, La Spaziale, La Pavoni, Saeco and Gaggia use this design. The external diameters for this sight glass gasket are 17,2mm and 13mm. The internal diameter is 11mm. The heights for this gasket is...

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...

The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...

The sight glass on this page is used on a variety of Lever espresso machines by the brand Faema. This sight glass can be used on models such as the Faema E61, Faema President and the Faema Lambro espresso machine. The sight glass has a outer diameter of 12mm and a overall length of 175mm. This sight glass has been made in Italy. The gasket you need for...

The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130  This blue silicone portafilter gasket has a...

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Carimali, Casadio, San Marco, San Remo, Vibiemme, Bezzera, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli,...

The item on this product page is a anti vacuum valve. This valve can be used on espresso machine brands such as ECM Heidelberg and Isomac. But basically on every espresso machine which has a ¼” connection it can be installed. The ECM Heidelberg part reference number is P2561 and the Isomac part reference number is IS000263.  This...

Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...

On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...