Faema P4

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

This brewing group spare part is used on various older Faema brewing groups. The Faema part reference number for this item is 3161116451.  This valve part is used in the exhaust side of the brewing group. This valve part has been made from machined brass. on the inside of the gasket holder is a gasket already installed. This item has been made in...

The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema and La...

The portafilter gasket ton this product page is a OEM/Original Faema spare part, but can also be used on various Casadio espresso machine models. The Casadio part reference number is 402199010, the Faema part reference numbers are402199000, 402199010 and 4701016528.  This gasket is made from NBR. The outer diameter is 74mm the inner diameter is 58mm and...

The item on this product page can be used on a older Faema espresso machine brewing group, the Faema E64. This compression spring is used as to seal off the drain valve in the bottom of the brewing group. This camme compression spring is made from stainless steel. The outer diameter is 9,4mm and the length is 20mm.

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...

This brewing group diffuser/nozzle is used on various Faema brewing groups. The Faema part reference for this item is 4161024761 and 4161133848. This brass nozzle has a outer diameter of 21mm. the female thread used is a M5 with a pitch of 1mm. The item has been made in Italy. You can use this brewing group diffuser on the Faema E91, Faema E92,...

The portafilter gasket on this page is used on various Wega espresso machine models. The Wega part reference for this item is WY12228. This portafilter gasket has been made from NBR. This gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. There are on the inside 3 cuts. This gasket has been made in Italy. You can use...