Filter by
Categories
Price
€ €
Manufacturers
Filter

Home

Faema E61 lever knob Faema E61 lever knob

Faema E61 lever knob

The handle knob on this page can be used on Faema E61 brewing groups. This handle goes on the brewing group control lever. Originally these were made from Bakelite, but nowadays that isn’t made that much anymore. The Faema part reference fort his item is 4741135910  This plastic lever brewing group handle is made from a shiny plastic. In the...
€9.60
compare
Quick-view
Grimac G11 steam valve Grimac G11 steam valve

Grimac G11 steam valve

The steam valve on this page can be used on the Grimac G11 espresso machine. The part reference for this item is A2200021. This steam valve has been made completely out off brass in Italy. The inlet valve from the boiler is a 3/8” BSP-G thread and on the steam tube side it is as well a 3/8’BSP-G thread.
€41.19
compare
Quick-view
Eureka pin spring 4x12mm

Eureka pin spring 4x12mm

The item on this product page is a OEM/Original Eureka spare part. This item is as well used with Nuova Simonelli Coffee grinders. The part reference for this item is for Eureka 6002.2319 and for Nuova Simonelli 15800026. This small compression spring has a outer diameter of 4mm. the length is 12mm. This spring has been made in Italy. You can use...
€5.27
compare
Quick-view
Motta 198 Cappucino spoons Motta 198 Cappucino spoons

Motta 198 Cappucino spoons

The spoons on this product page are made for cappuccino. They are made by the Italian company Metallurgica Motta in Italy. These espresso spoons have been made from stainless steel 18/10, also known as 304. Which is food graded. The length of these spoons is 125mm and the width is approx. 27mm. they have been polished into a mirror finish. These spoons...
€11.69
compare
Quick-view
Faema E61 steam/water group expanding spring Faema E61 steam/water group expanding spring

Faema E61 steam/water group expanding spring

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...
€1.80
compare
Quick-view
San Remo heating element...

San Remo heating element 3500W 220V original

The heating element shown on this product page is a OEM/original San Remo spare part. The part reference number for this item is 10455074A This original heating element produces 3500W at 220V. The immersion depth is 325mm, there are in total 6 connection poles. In the middle is a bulb holder. The fitting used on the flange is a 1” ¼. This...
€202.53
compare
Quick-view
La San Marco steam/water valve gasket holder La San Marco steam/water valve gasket holder

La San Marco steam/water valve gasket holder

This item is a OEM/Original La San Marco spare part. This item is a brass gasket holder/spring guide. In one side there can be installed a gasket of 15x5,5x4mm. On the other side you can install the valve spring. This gasket holder is used in various steam and water valves, as well in the water inlet valves. The part references for this La San Marco item...
€6.80
compare
Quick-view
Rancilio heating element 1-2 group 3000W 220/380V Rancilio heating element 1-2 group 3000W 220/380V

Rancilio heating element 1-2 group 3000W 220/380V

On this page you will find a 2 group heating element suitable for various Rancilio espresso machine models. The Rancilio part reference for this item is 33323300. This heating element produces 3000W and can run on 220 and 380V. The element has 6 electronic terminals. The immersed length of the heating element is 230mm. The type of flange used is a...
€70.19
compare
Quick-view
La San Marco 105 Level gasket La San Marco 105 Level gasket

La San Marco 105 Level gasket

On this page you will find a silicone sight glass gasket suitable for the La San Marco 105 espresso machines. The part reference is 109150 This gasket has been made from clear/white silicone. The outer diameters are 20 and 17mm. The internal diameter is 14mm. The height is 9,5 and 4mm. This gasket has been made in Italy
€1.38
compare
Quick-view
Mazzer dosing device push buttons and cover Mazzer dosing device push buttons and cover

Mazzer dosing device push buttons and cover

This diaphragm is used in a variety of Mazzer coffee grinders. This diaphragm does only include the metal ring, and the diaphragm, so not the push button board with display(S000SPU03). But this item can be found on a variety of coffee grinders made by Mazzer, solely the electronic ones not the doser grinders. You will find it on the Mazzer Super Jolly...
€313.92
compare
Quick-view
RPM motor for clamp ring pump 165W 220/230V RPM motor for clamp ring pump 165W 220/230V

RPM motor for clamp ring pump 165W 220/230V

This motor is made by the Italian company RPM, It has a power ouput of 165W with 220/230V 50/60Hz. To start the motor up it uses a capacitor of 10 µf. The type of espresso machine pump used on this clamp ring motor is a clamp ring pump, where you use a stainless steel clamp to clamp the motor to the pump. Pumps suitable for this model are made by...
€439.57
compare
Quick-view