Filter by
Categories
Price
Manufacturers
Filter

Home

Wega water valve handle

The valve knob on this product page is a OEM/Original Wega spare part. The Wega part reference for this item is WY15273. This valve knob is made from black plastic. On the face of the knob is a silk print of a water valve, which indicates that this knob is for opening the water valve. This valve knob has been made in Italy. This valve handle can be used...
€10.58

Mazzer mini 320gr complete coffee hopper

It is not uncommon that your hopper breaks or is virtually impossible to clean again. Especially when you have a bar or coffee shop, clear gear is key. Then the easiest solution is to buy a new hopper. On this page you find a original hopper made for the Mazzer mini. This hopper is suitable for the Mazzer mini doser, Mazzer Mini Electronic A and Mazzer...
€48.56

La Spaziale safety valve 1/2" 1,5 bar

Every espresso machine boiler has a safety valve installed on top of it, this makes sure that it will release the pressure automatically when it becomes to high. This same situation is with La Spaziale espresso machines. The la Spaziale espresso machine has a ½” bsp-g fitting to install the safety valve. The maximum pressure is pre-set on this safety...
€42.83

La Cimbali filterbasket 1 coffee 7gr

The single coffee stainless steel filterbasket on this page can be used with a variety of La Cimbali espresso machines. This item has been made in Italy by IMS filtri with the part reference GC1T044 The 1 cup coffee filter basket has a outer edge diameter of 68mm and a height of 22,5mm. The hole pattern is located in a diameter of 30mm.  The filter...
€4.10

Compak flap with microswitch box

The item on this product page is a OEM/Original flap with microswitch box. This item can be used on various Compak coffee grinders. As well as Astoria and Wega models. The part reference for this item is for Astoria 28002007, for Wega WY28002007 and for Compak K..322  This original flap with microswitch box has a microswitch already installed....
€48.56

Astoria/Wega green pilot light kit 230V

On this page you will find a green light kit for various Astoria and Wega espresso machines. The Astoria part reference for this item is 83210010R and the Wega part reference is WY83210010R. This green light kit comes with 2 components. The green light with cable and connectors and the protective grommet. This light runs on 230V. You can use this kit on...
€5.55

La Cimbali M30 pump manometer 0 - 15 bar

On this product page you will find a pump pressure gauge suitable for the La Cimbali M30. The part reference for this pump manometer is 496-246-000. The pressure gauge has a pressure range from 0 to 15 bar. The body diameter is 57mm and the ring diameter is 60mm. The pressure gauge has on the back a male 1/8” BSP-G fitting. The pressure gauge has...
€29.76

La Spaziale pin for tap 15mm

The item on this product page is a lever tap pin, This is a OEM/Original La Spaziale spare part. The La Spaziale part reference number for this item is 08466 . This pin is used in the lever mechanism of the steam and water valves. The axle itself has a diameter of 4mm and the length is 15mm. This pin has been made in Italy. This steam and water...
€4.16

O ring gasket 31,42x2,62mm FKM

The item on this product page is a o ring used on various Elektra espresso machine models. The Elektra part reference numbers for this item are 00098035 and 01228035. This o ring has been made from the material FKM. The cord diameter is 2,62mm the internal diameter is 31,42mm. This o ring has been made in Italy. This o ring can be used on the Elektra...
€4.32

San Remo Verona RS dosing device

The dosing device on this product page is a OEM/Original San Remo spare part.  The San Remo part reference number is 10112382E and the Gicar part reference number is 9.5.32.89G00 This dosing device can only be used on the San Remo Verona RS. This unit is called the Dosatura 3d5 ORCHESTRA PLUS FULL RANGE “VERONA RS”. The unit uses as main...
€695.19