Filter by
Categories
Price
Manufacturers
Filter

Home

Faema boiler gasket 150x137x3mm

The boiler gasket on this page is used on various older models of Faema espresso machine boilers. This gasket has a outer diameter of 150mm a inner diameter of 137mm and a thickness of 3mm. this gasket has been made in Italy. You can use this boiler gasket on the Faema P4, Faema P6, Faema E64 and the Faema E66.
€11.69

Ulka vibration pump EX5GW 48W 220V

The Ulka pump on this product page is the EX5GW model. This pump model is a small 220V pump used on various applications. The Ceme part number for this item is 101321GWPS6. This Ulka pump runs on 220V 50/60Hz and uses 48W of power. The inlet side is made from plastic and has a diameter of 6mm and the outlet side is made from brass and has a female 1/8”...
€28.56

Bipolair switch orange 16A 250V

On this page you will find a orange coloured bipolar switch. This switch can be used on a variety of espresso machine such as Bezzera and Carimali. The Carimali part reference is 95.01193, the Bezzera part reference is 3319035. This switch has been rated up to 16A at 250V. The switch itself has a orange colour and is illuminated when turned on. The...
€6.93

Victoria Arduino Adonis steam valve right hand

The steam valve on this page is a OEM/Original Victoria Arduino steam valve. This valve can be used on the Victoria Arduino Adonis espresso machine, note only the earlier models. The later models have a different type of valve. The Victoria Arduino part reference for this item is 98060000000008. This steam valve is used on the right side of the machine....
€313.92

Mazzer timer knob

The timer knob on this product page is a OEM/Original Mazzer spare part. The Mazzer part reference for this item are S000MAB01 and S000MAB01/QQQ. With this switch knob you control the timer of 50 seconds, which is available in a single or 3 phase version. This switch knob has been made in Italy. You can use this switch knob on the Mazzer M100,...
€22.82

Quick Mill grinding blades 54mm right

The set of grinding burrs on this product page can be used on mainly older models of Quick Mill coffee grinders. There is no part reference available for this set of grinding burrs. This type of grinding burrs is from the flat type. The turning direction is clockwise (right). The outer diameter is 54mm, the internal diameter is 30,5mm and the thickness...
€38.41

Rocket steam water valve model 1

The item on this product page is a steam and water valve which can be used on various Rocket Giotto espresso machine models. This specific model of steam valve has the part reference of A227704280. This valve can only be used on Rocket espresso machines up to serial number D1224G2V3181. This valve is complete and ready to install on your espresso...
€96.57

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87

Motta Europa milk jug 0,5L black

Every barista needs to be able to froth up milk, this can be any type of milk besides cow milk. But for that you need a milk jug. On this page you will find a milk pitcher of the Italian brand Motta Metallurgica. This specific model is called the Europa and this is the 0,5L version This milk jug is made from stainless steel 18/10, which is also called...
€48.28

La San Marco EN heat exchanger gasket 34x26,5x2mm

The gasket on this product page can be used on various heat exchanger (HX) systems on various San Marco espresso machine models. The San Marco part reference numbers for this item are 109078 and CTSGUA0260.  This fibre gasket has a outer diameter of 34mm a inner diameter of 26,5mm and a thickness of 2mm. This gasket has been made in Italy. You...
€0.83