SanRemo temperature probe coffee boiler NTC 3.3K original

Faema E61 group collector rod gasket holder

The nut on this product page is a welding end cap nut. This nut is used to install the tube with the welding end cap to a other fitting.  This brass nut is used in combination with a solder fitting. The thread on the inside is a female 3/8” BSP-G thread. The height of the nut is 16mm and the central hole for this nut is 12,5mm. This brass...

The stainless steel compression spring on this page is used on various Bezzera steam and water valves. The part reference for this Bezzera compression spring is5471504  The compression spring has a outer diameter of 14mm and a height of 10mm. This item can be used on various Bezzera models such as the Bezzera Galatea, Bezzera Ellisse, Bezzera...

The heating element listed on this page is suitable for various Rancilio 3 group espresso machines. The matching Rancilio part number for this item is 33323430  This specific heating element produces 4300W and can run on 230/400V. The element has 6 poles with male spade connectors. The immersed length for this heating element 375mm. in between the...

Ulka espresso machine vibration Pump EP5 230V

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

The item on this product page is a OEM/Original Victoria Arduino spare part. This item has the part reference of06100106. This body panel is used to seal of the top section of the steam and water valve on the Victoria Arduino VA388 Black Eagle. This item has been made in Italy.

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...