0
My cart
Vibiemme chromed lever sleeve
€48.15
€39.79 tax excl.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated blind cap also attached with 2 M6 allen bolts.
This specific part, the camme shaft holder, does what it says. It holds the camme shaft in place. But it also holds the gaskets internally to seal off the shaft of the camme shaft.
If you are unable to find the part your looking for, just send us a message and we might be able to help you with finding the right part.
45-008-L-1192183
Data sheet
- Brand
- Vibiemme
- Country of manufacturing
- Made in Italy
- part number
- Vibiemme RACCCACOGR
- Type
- Original
- Type part
- Coffee brewing group body
- Vibiemme
- Cubo
Domobar
Domobar Junior
Domobar Super
Replica
Comments (0)
No customer reviews for the moment.
8 other product
O ring 7.59x2.62mm FKM
The item on this product page is a O-ring which can be used on various espresso machine brewing groups. This o ring can be used on brewing groups and water inlets of the brand Cimbali and Faema. The part references can be found in the extra info tab.
This o ring is made from the material FKM. The cord diameter is 2,62mm and has a internal diameter...
€1.89
Ulka Vibration pump EP5 41W 120V
The pump on this product page is made by the Italian company Ulka. This type of pump is called a vibration pump and doesn’t require a motor. This specific model is the EP5, the Ulka part reference number is 1.01.305.05/PA and the Ceme part refence numbers are 1.01.305.05/PA and 10130505PA.
This model of pump is the 120V 60Hz version of the EP5 and uses...
€27.82
Crushable copper washer 1/4" 18x14x2mm
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio.
This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
€0.95
O ring FKM 2.7x10.5mm
this small o ring is used in various steam and water valves used by Faema. The part reference number for this item is 402206000.
This o ring has been made from FKM. The cord diameter is 2,7mm and the internal diameter is 10,5mm. This o ring has been made in Italy.
You can use this o ring on the Faema E71, Faema Teorema, Faema Emblema, Faema Stylema,...
€0.96
O ring 1.78x20.35mm silicone
The o ring on this page is a silicone o ring used on various steam and water valves on Elektra espresso machines. The Elektra part reference number for this item is 01888035
The o ring on this page is made from silicone. The cord diameter is 1,78mm. The internal diameter is 20,35mm. this o ring has been made in Italy.
You can use this o ring on the...
€1.54
La Spaziale S3 touchpanel 5 button
The touch panel membrane on this page is used on the La Spaziale S3 espresso machine. This membrane has 5 selection options, 2 for single coffee, 2 for double coffee and one for continues (the on/off key).
This item is only the 5 button membrane, the circuit board which is behind it (part number 06001 ) is not part of this item and needs to be...
€48.56
T fitting 1/4"MM 1/4"F
The fitting on this page is a T shape fitting. This fitting has 2 male threads and 1 female thread1.
The T fittings are all 1/4” BSP-G threads. They are 1/4” Female, 1/4” male and a 1/4” Male thread. This fitting has been made out of casted and machined brass. It is possible that you receive one with a nickel coating or not. This...
€5.43