Brasilia Club heating element 1200W 230V
search
  • Brasilia Club heating element 1200W 230V
  • Brasilia Club heating element 1200W 230V

Brasilia Club heating element 1200W 230V

€54.12
Tax included

€44.73 tax excl.

qty

compare
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

On this page you will find a small heating element which can be used on a variety of domestic espresso machine brands such as Brasilia, Elektra and Isomac. The Brasilia part reference is 00625.2.00.08, the Elektra part reference is 01958035 and for Isomac the reference is IS000505.

This heating element produces 1200W at 220V, the element has 2 connecting terminals. The Immersed length of the element is 68mm. the outer diameter is 55mm. The connecting fittings are ¼”.

What kind of gasket do I need to seal off the heating element. this is done with a o ring. The o ring has a cord diameter of 2,62mm and the internal diameter is 12,37mm.

You can use this heating element on the Brasilia Club, Brasilia Lady, Isomac Venus and the Elektra Miniverticale.

Brasilia
13-128-L-1755340

Data sheet

Brand
Brasilia
Elektra
part number
Brasilia 00625.2.00.08
Elektra 01958035
Submerged length
68mm
Type part
Heating element
Voltage
230V
Watt
1200W
Which heating element thermostat do I need for my heating element? insert_link

This does depend of which brand of espresso machine you have. Some espresso machine brands don’t use a heating element thermostat at all. Most thermostats are interchangeable with each other, but always make sure that you use a single phase or a 3 phase version, check out the thermostats we have on our website

What is important choosing the right heating element for my coffee machine? insert_link

Well first of all the heating element flange, seen those are in most cases not interchangeable with each other. seen a Cimbali heating element won’t fit a Nuova Simonelli heating element due to the flange model. A other important feature is the length of the heating element. When it is too long, it won’t fit. When the element is too short you will get uneven heat distribution in the boiler.

How do I descale a heating element? insert_link

Well descaling a heating element is quite simple. A heating element can be placed inside a water tight tube. But the flange can not be submerged, the chance that water gets inside the heating element is possible. Which shorts out the element and makes it unuasable.

To descale a heating element you can use Puly caff Calcinet descaler, this need to be dissolved into hot water. First remove the loose lime scale. If it doesn’t remove all the limescale, repeat the procedure.

Do all the heating elements come with a heating element gasket? insert_link

A heating element only comes with a gasket when this is specified. If this is not specified a heating element gasket isn’t supplied with the element.

Comments (0)
No customer reviews for the moment.

8 other product