Carimali
The Ma-Ter XP 200A pressure switch. Is more uncommon model in the Ma-ter espresso machine switch assortment. This type of double pressure switch is used on La Carimali espresso machines.
The thread used a ¼” BSP-G. The pressure reach is 0,5-1.5bar. It is pre-set at 1,4 bar. The switches are both rated for 16A at 125/250V.
The Ma-ter XP...
€34.23
La Carimali steam pipe
On this product page you will find a steam tube suitable for various La Carimali models. The Carimali part reference for this item is 02.01459.CR.
This steam tube does not come with a attachment nut for the steam tube. This steam tube is a chrome plated model. The steam tip is a 1/8” BSP-G thread. The steam tip itself has 4 steam holes.
This steam...
€25.60
La Carimali Pratica push button membrane 5 buttons
On this product page you will find the push button membrane for the La Carimali Pratica. The Carimali part reference for this item is 96.00873, this item has been manufactured in Italy
This membrane has in total 5 buttons. The star shaped one is the continuous and programming button. The other ones can be programmed with the star button to be set at...
€78.48
La Carimali spring guide
The item on this product page is a brass spring guide for various La Carimali steam and water valves. This item is a OEM/original spare part and has the Carimali part reference number of 22.00929.
This spring guide is made from brass and makes sure that the compression spring in the tube assembly stays in place. This item has been made in Italy.
This...
€4.16
Solenoid valve connector
The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other.
These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm.
This solenoid valve connector can be basically...
€2.77
RPM clamp ring motor 165W 230V 50Hz with junctionbox
The main manufacturer of espresso machine motor pumps comes from Italy and that is RPM. This coffee machine motor has also been manufactured by RPM, with the model number 11002755.
The motor procures 165W 220V with 50Hz. To start up the motor the capacitor needs 10 µf. The special thing with this motor. It has a junction box mounted on the side of...
€222.08
Steamtube anti scorch clip
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube.
This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€1.92
Safety valve 3/8'' 1,8 bar
On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve.
Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
€12.18
La Carimali dosing device 3d5 Maestro 3GRCTZD 230Vac
On this product page you will find a Carimali dosing device for various models. This model is suitable for 1 to 3 group Carimali espresso machines which run on 230V. The Carimali part reference number is 96.00475. The name of the dosing device is 3d5 Maestro 3GRCTZD 230Vac
This dosing device is suitable for the Carimali E9, Carimali Temastyle, Carimali...
€306.96
Solenoid valve silicone o ring 6,07x1,78mm
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.53
La Carimali temperature probe
The temperature probe on this page can be used on various La Carimali espresso machine models. The La Carimali part reference number for this item is 96.05151
This temperature probe has a male 1/4“ fitting. The bulb itself has a diameter of 6,5mm and a overall length of 25mm. This probe has been made in Italy.
You can use this temperature probe on...
€48.15
Steam water valve shaft gasket holder
The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab.
This steam and water valve shaft has been made from low lead content brass. On...
€7.74